Epson BrightLink Pro 1450Ui Installation Guide - Ultra-Short Throw Wall Mount - Page 33
Warning
View all Epson BrightLink Pro 1450Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English G Attach the projector to the wall mount 1. Loosen the two screws with a cross-head screwdriver and remove the cable cover from the projector. Screws (x2) 2. Attach the 3-axis adjustment unit to the wall mount arm. • Decide which position you want to use for installing the 3-axis adjustment unit. Mount it at the stamp ( ) when the image is less than 75 inches diagonally (85 inches for WUXGA images), or at the stamp ( ) when the projected image is 75 inches or more diagonally (85 inches or more for WUXGA images). • Tighten the M4 × 12 mm hexagon socket head cap bolts (×4) supplied to install the 3-axis adjustment unit. Warning When installing or adjusting the wall mount, do not use adhesives to prevent the screws from loosening and do not use lubricants or oils on the projector slide plate. This may cause the case to crack and the projector to fall, resulting in personal injury or property damage. 33