Epson BrightLink Solo Interactive Module ELPIU01 User Manual
Epson BrightLink Solo Interactive Module ELPIU01 Manual
View all Epson BrightLink Solo Interactive Module ELPIU01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson BrightLink Solo Interactive Module ELPIU01 manual content summary:
- Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 1
Interactive Unit User's Guide - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 2
• Make sure you read the Quick Setup Guide and follow the instructions in this document to install the Interactive Unit. • Keep the Quick Setup Guide for future reference. Explanation of Symbols Warning Caution This symbol indicates information that, if ignored, could possibly result in - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 3
, tighten them firmly. Otherwise, the product or wall plate may fall and cause personal injury or property damage. • Follow the instructions in the Quick Setup Guide when installing the wall plate. Otherwise, the wall plate may fall, resulting in personal injury or property damage. Caution • Do - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 4
open any covers on the product except as specifically explained in this User's Guide. Never attempt to disassemble or modify the product (including consumables). Refer all repairs to qualified service personnel. Electrical voltages inside the product can cause severe injury. • Disconnect the USB - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 5
Battery Precautions Warning • If liquid leaking from the batteries gets into your eyes, do not rub your eyes. Wash them immediately with clean water and consult a doctor. • Do not leave the batteries or the Easy Interactive Pen inside a vehicle with the windows closed, in places where they will be - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 6
Contents 6 Important Safety Instructions 2 Introduction Product Features 8 Included Items 8 Parts Location 9 Interactive Using the Pen as a Mouse 18 Solving Problems Problems and Solutions 20 Easy Interactive Pen Problems 20 Calibration Problems 20 Where to Get Help 21 Notices - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 7
Introduction The Interactive Unit is a wall-mounted receiver that works with your projector to turn virtually any surface into an interactive whiteboard. You can use it with your existing ceiling-mounted projector and standard whiteboard. The Interactive Unit includes all the hardware and software - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 8
Epson website at http://www.epson.com. Included Items Interactive Unit with USB cable Long wall plate Short wall plate AAA Pen battery (4 pieces) User's Guide CD 8 Pen tray Easy Interactive Driver CD M5 x 25 mm Bolt (2 pieces) M5 Wrench Easy Interactive Pen (2 pieces) - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 9
Parts Location Interactive Unit 9 Easy Interactive Pen Name A Easy Interactive Function receiver B Wall plate cover C Wall plate Function Receives signals from the Easy Interactive Pen. Covers the connection between the Interactive Unit and the wall plate. Use this to mount the Interactive Unit. - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 10
Parts Location 10 Pen Tray Name A Fixing points B Security hole Function Attach the pen tray to a whiteboard or wall. Pass a commercially available lock through here. a It is recommended that the pen tray be tightened with two commercially available M5 bolts. - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 11
Getting Started Before you can use your Interactive Unit, you need to install the software and connect the cables to your computer. - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 12
Control screen, click Continue or Yes. Mac OS Double-click EIDriverVxxx_Setup in the Epson window. b Select your language. c Follow the on-screen instructions to install the software. d When you see one of the following screens, select Register to Startup (Windows) or Start up (Mac OS) and - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 13
Installing the Pen Batteries 13 Before you can use the pen, you need to install the batteries. To check the batteries, press the button on the pen. If the indicator light is green, the batteries have enough power. s p.9 If you need to install or replace the batteries, use two alkaline AAA - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 14
Connecting the Cables 14 VGA computer cable USB cable First you need to make sure that your computer is connected to your projector using the VGA computer cable that came with the projector. Connecting the VGA Computer Cable a Locate the VGA computer cable connected to the projector. b Connect - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 15
Using the Easy Interactive Pen The Easy Interactive Pen included with your Interactive Unit turn almost any wall or board into an interactive whiteboard. This chapter tells you how to calibrate your system and use the pens. - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 16
the Interactive Unit and projector are connected and the Easy Interactive Driver icon is displayed, you're ready to calibrate. See the next section for instructions. a Do not select Exit or Quit from the Easy Interactive Driver menu. If you do, you will have to open the driver as described above - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 17
Calibrating 17 c Wait until you see a flashing green circle in the upper left corner of your projected image. d Touch the center of the circle with the tip of the pen. The circle stops flashing and turns black. You see another circle on the right. f Continue until all of the circles are black. e - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 18
Using the Pen as a Mouse 18 The Easy Interactive Driver allows you to use the pen as a mouse. If you installed interactive whiteboard software, you can also use the pens to write or draw on the projected image. s p.9 Press the button on the pen to test the batteries. If the indicator light is - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 19
Solving Problems If you have a problem with your product, you can check the following section for troubleshooting information. - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 20
hold the pen at an angle to the projection surface. • If the pen position is not accurate, you may need to recalibrate. s p.16 Calibration Problems • If the flashing circles don't appear when you try to calibrate, make sure the USB cable is securely connected to the computer. s p.14 Try restarting - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 21
Where to Get Help 21 If you notice any problems or you think the Interactive Unit is broken, stop using it and contact your local dealer for further advice. Or visit http:// www.epson.com to locate a support or service representative in your area. Check the website periodically for updates to the - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 22
Notices - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 23
Specifications General Image size Weight 63 to 102 inches (4:3 XGA) 60 to 96 inches (16:10 WXGA) 58 to 93 inches (16:9 widescreen) Approximately 2.3 kg (5.08 lb) with long wall plate Approximately 1.8 kg (3.97 lb) with short wall plate 1.45 kg (3.2 lb) without wall plate Dimensions Units: mm (in - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 24
V DC AAA x 2, Alkaline 168 mm (6.61 in.), diameter 21 mm (0.83 in.) 33 g (1.16 oz) System Requirements Windows Windows 2000 Service Pack 4 or later Windows XP Service Pack 2 or later (Home Edition/Professional) Windows Vista 32-bit versions only (All editions except for Starter) Windows 7 32-bit - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 25
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. Interactive Pen is so small, FCC Statemant for Verificaton is written in the manual. FCC Statement for Verification This device complies with Part 15 of the FCC - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 26
Declaration of Conformity 26 According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Located at: Epson America, Inc. MS 3-13 3840 Kilroy Airport Way Long Beach, CA 90806 Telephone: (562) 290 - Epson BrightLink Solo Interactive Module ELPIU01 | User Manual - Page 27
Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of Corporation. The contents of this guide may be changed or updated without further notice. Illustrations in this guide and the actual projector may
Interactive Unit
User's Guide