Epson BrightLink Solo Interactive Module ELPIU01 User Manual - Page 20
Problems and Solutions, Easy Interactive Pen Problems, Calibration Problems
View all Epson BrightLink Solo Interactive Module ELPIU01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Problems and Solutions 20 Easy Interactive Pen Problems • Make sure the USB cable is securely connected to the Interactive Unit and computer. Try disconnecting and reconnecting the cable to your computer. • If you don't see the pen icon on your taskbar (Windows) or in the Dock (Mac OS), do one of the following: Windows Select or Start > All Programs or Programs > EPSON Projector > Easy Interactive Driver. Mac OS Open the Application folder, then select the Easy Interactive Driver icon. • If you see a red ^ on the pen icon, the computer and projector are not connected correctly. Try removing and reconnecting the USB cable. • Make sure the pen batteries have enough power. If the light on the pen doesn't turn green when you press the button, you need to replace the batteries. • Make sure you are not casting a shadow on the projection surface, and nothing is blocking the signal between the pen and the interactive receiver on the Interactive Unit. • Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and the pen receiver are not in direct sunlight or other sources of bright lighting. • For easier operation, hold the pen at an angle to the projection surface. • If the pen position is not accurate, you may need to recalibrate. s p.16 Calibration Problems • If the flashing circles don't appear when you try to calibrate, make sure the USB cable is securely connected to the computer. s p.14 Try restarting the Easy Interactive Driver. s p.16 • If the circles don't stop flashing and don't turn black (or they stop flashing and turn black automatically), dim or turn off any bright lights near the projection surface.