Epson C117001-N Service Manual - Page 105
Removing the Plunger, 2.7.5 Removing the Plunger and Paper Bail
UPC - 010343816480
View all Epson C117001-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
DFX-5000+ Sawica Manua! Disassembly and Assembly 3.2.7.5 Removing the Plunger and Paper Bail Asaembly l%is section describes how to remove the plunger (loading solenoid) and paper bail assembly. 1. Discomect the black, 2-pin plunger connector from the connector junction board assembly, and remove the plunger cable from the connector junction board assembly. (Refer to the Appendix for more intimation on the connector junction board able connections.) 2. Remove the 2 CPS (SP) (M3 x 6) screws securing the plunger to the left side frame and remove the plunger. 3. Remove the iron core of the plunger from the paper bail shaft. Iron core 1A CPS (SP) (M3x. 6) / Figure 3-37. Removing the Plunger c.) Rev. A 3-29
c)
.
DFX-5000+
Sawica
Manua!
Disassembly and Assembly
3.2.7.5 Removing the Plunger and Paper Bail
Asaembly
l%is
section describes how to remove the plunger (loading solenoid) and paper bail assembly.
1.
Discomect
the
black,
2-pin plunger connector from the connector junction board assembly,
and remove the plunger cable from the connector junction board assembly. (Refer to the
Appendix for more intimation on the connector junction board
able
connections.)
2. Remove the 2
CPS
(SP)
(M3 x 6) screws securing the plunger to the left side frame and remove
the plunger.
3. Remove the iron core of the plunger
from the
paper bail shaft.
Iron core
1A
CPS
(SP)
(M3x6)
./
Figure 3-37. Removing the Plunger
Rev.
A
3-29