Epson DFX-8500 User Manual

Epson DFX-8500 - Impact Printer Manual

Get Epson DFX-8500 - Impact Printer PDF manuals and user guides View all Epson DFX-8500 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson DFX-8500 manual content summary:

  • Epson DFX-8500 | User Manual - Page 1
  • Epson DFX-8500 | User Manual - Page 2
  • Epson DFX-8500 | User Manual - Page 3
    ® 9-Pin Dot Matrix Printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent
  • Epson DFX-8500 | User Manual - Page 4
    comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However,
  • Epson DFX-8500 | User Manual - Page 5
    -shi, Nagano-ken 392-8502 Japan Representative: Address: EPSON EUROPE B.V. Prof. J. H. Bavincklaan 5 1183 AT Amstelveen The Netherlands Declares that the Product: Product Name: Type Name: Model: Dot Matrix Printer DFX-8500 P970A Conforms to the following Directive(s) and Norm(s): Directive
  • Epson DFX-8500 | User Manual - Page 6
    switch on and off. T Do not let the power cord become damaged or frayed. T If you use an extension cord with the printer, printer before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer. T Except as specifically explained in this guide, do not attempt to service the printer
  • Epson DFX-8500 | User Manual - Page 7
    servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the cabinet damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust
  • Epson DFX-8500 | User Manual - Page 8
    problems arising from the use of any options or consumable products other than those designated as Original EPSON Products or EPSON Approved Products by Epson the supply voltage. Important: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code: Green
  • Epson DFX-8500 | User Manual - Page 9
    a Place for the Printer 1-4 Installing the Ribbon Cartridge 1-6 Plugging in the Printer 1-10 Connecting the Printer to Your Computer 1-11 Chapter 2 Setting Up Your Software For Windows 95 Users 2-2 Installing the printer driver using My Computer 2-3 Installing the printer driver using plug-and
  • Epson DFX-8500 | User Manual - Page 10
    settings 2-19 For DOS Program Users 2-21 Installing the printer driver 2-21 Chapter 3 Paper Handling Using the Two-Tractor System 3-2 Positioning the paper supply 3-2 What paper types you can use 3-3 Loading Paper onto the Front Tractor 3-4 Loading Paper onto the Rear Tractor 3-10 Adjusting
  • Epson DFX-8500 | User Manual - Page 11
    tables 4-11 DIP switch functions 4-16 Using the Paper Memory Feature 4-22 Saving paper memory settings 4-23 Chapter 5 Using EPSON Status Monitor 2 Installing EPSON Status Monitor 2 5-2 Accessing EPSON Status Monitor 2 5-3 Checking the Printer Status 5-4 Using the EPSON Status Monitor 2 window
  • Epson DFX-8500 | User Manual - Page 12
    cutter 6-24 Paper handling 6-28 Removing the paper cutter 6-32 Interface Cards 6-35 Installing an interface card 6-36 Using a serial interface card (C82305@ or C82306 6-38 Chapter 7 Maintenance and Transportation Replacing the Ribbon Cartridge 7-2 Cleaning the Printer 7-4 Transporting the
  • Epson DFX-8500 | User Manual - Page 13
    8 Troubleshooting Using the Error Indicators 8-3 Printing a Self Test 8-5 Using the Hex Dump Mode 8-6 Problems and Solutions 8-7 Power supply 8-8 Paper handling 8-9 Operation 8-13 Printout 8-15 Options 8-18 Clearing a Paper Jam 8-19 Appendix A Specifications Printer Specifications
  • Epson DFX-8500 | User Manual - Page 14
    and the Republic of Ireland Users . . . . . C-4 Enquiry Desk C-4 Customer Support C-4 Faxon EPSON C-5 EPtec - Bulletin Board Service for latest drivers and utilities C-5 World Wide Web C-5 For Australian Users C-6 EPSON FAXBACK C-6 EPSON Bulletin Board System C-6 Internet URL http://www
  • Epson DFX-8500 | User Manual - Page 15
    Printer Parts control panel front cover sprockets* paper supports* power switch * front tractor unit parts sprockets** top cover ribbon cartridge paper supports** paper separator rear flap paper bail print head ** rear tractor unit parts paper separator cover rear cover serial
  • Epson DFX-8500 | User Manual - Page 16
    three bit-map fonts. T The ability to print on multi-part forms consisting of one original plus up to six copies at the front tractor. T A convenient control panel that allows direct selection of fonts. T Support of advanced EPSON ESC/P® commands and IBM® 2380/2381 Plus emulation. T A printer driver
  • Epson DFX-8500 | User Manual - Page 17
    includes a printer driver for Microsoft® Windows® operating systems. Chapter 3 includes important information on paper handling and printing on various types of paper. Chapter 4 describes how to use your printer's control panel functions, change DIP switch settings, and use the paper memory feature
  • Epson DFX-8500 | User Manual - Page 18
    Chapter 8 contains troubleshooting tips. If the printer does not operate properly or the printed results are not what you expect, see this chapter for a list of problems and solutions. Appendix A gives the printer's specifications. Appendix B lists ESC/P emulation commands and the printer's built-in
  • Epson DFX-8500 | User Manual - Page 19
    If You Need Help If you need assistance in setting up or using your printer, see Appendix C for guidelines on how to get customer support. 4 Introduction
  • Epson DFX-8500 | User Manual - Page 20
    Chapter 1 Setting Up the Printer 1 Unpacking the Printer 1-2 Choosing a Place for the Printer 1-4 Installing the Ribbon Cartridge 1-6 Plugging in the Printer 1-10 Connecting the Printer to Your Computer 1-11 Setting Up the Printer 1-1
  • Epson DFX-8500 | User Manual - Page 21
    Unpacking the Printer Because the printer weighs approximately 29 kg (64 lbs), you should not lift or carry it alone. Two people should carry it by the bottom, as shown here: 1-2 Setting Up the Printer
  • Epson DFX-8500 | User Manual - Page 22
    this guide, your printer box should include two EPSON printer driver diskettes, two Status Monitor software 1 diskettes, a Notice Sheet, and the following items: printer power cord screwdriver ribbon cartridge optional connector lock nuts Note: Depending on your printer model, the power cord
  • Epson DFX-8500 | User Manual - Page 23
    printer for easy operation and maintenance. T Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust. T Use a properly grounded electrical outlet; do not use an adapter plug. T Place the printer where you can easily unplug the power cord. 1-4 Setting Up the Printer
  • Epson DFX-8500 | User Manual - Page 24
    to load continuous paper through the bottom of the printer, choose a stand that provides an unobstructed paper path. T Position your printer's power cord and interface cable so they do not interfere with paper feeding. If possible, secure the cables to a leg of the printer stand. Setting Up the
  • Epson DFX-8500 | User Manual - Page 25
    removed and that the power cord is not plugged into an electrical outlet. Remove the ribbon cartridge from the box and plastic bag. Then follow these steps: 1. Open the top cover as shown below. w Warning: Never move the print head while the printer is turned on unless instructed to because this can
  • Epson DFX-8500 | User Manual - Page 26
    to the open section of the paper bail as shown below. 1 Position the print head here. 3. Remove the separator from the middle of the ribbon cartridge and discard it. Then detach the ribbon guide from the cartridge (but not from the ribbon) and turn the ribbon-tightening knob in the direction of
  • Epson DFX-8500 | User Manual - Page 27
    the notches nearest you over the two corresponding pins in the printer. Then push the cartridge down into position until the other two slots snap into place over the mounting pins in the printer. 5. Press lightly on both sides of the cartridge to make sure it is locked in place. 1-8 Setting Up the
  • Epson DFX-8500 | User Manual - Page 28
    with its angled edge facing back toward the platen. Turn the ribbon-tightening knob again to remove any slack in the ribbon. ribbon guide 7. Slide the print head from side to side to see that it moves smoothly and that the ribbon is not twisted or creased. print head Setting Up the Printer 1-9
  • Epson DFX-8500 | User Manual - Page 29
    do not match, contact your dealer for assistance. Do not plug in the power cord. 3. If the power cord is not attached to the printer, connect the appropriate end to the AC inlet on the printer's rear panel. 4. Plug the power cord into a properly grounded electrical outlet. 1-10 Setting Up the
  • Epson DFX-8500 | User Manual - Page 30
    not sure which one is required by your computer, check your computer manual. Note: Your printer has an auto interface mode function that allows you to connect to more than one interface at a time. See "Using DIP Switches" in Chapter 4. serial interface parallel interface If you have a suitable
  • Epson DFX-8500 | User Manual - Page 31
    the printer. 1. Make sure both the printer and computer are turned off. 2. Open the rear cover by grasping it on each side and pulling down. rear cover 3. Plug the cable connector securely into the printer's parallel or serial interface connector. serial interface parallel interface 1-12 Setting Up
  • Epson DFX-8500 | User Manual - Page 32
    1 connector. If your cable has a ground wire, connect it to the printer's ground connector as shown below. If you are connecting the serial interface, connector. (If your cable has a ground wire, connect it to the printer's ground connector as shown above.) Note: If the screws that come with
  • Epson DFX-8500 | User Manual - Page 33
    5. Open the plastic clamp to the right or left of the interface connectors by pulling out its top tab. Insert the cable in the plastic clamp and close the clamp, as shown below. 6. Close the rear cover. c Caution: Always close the rear cover before using the printer. 1-14 Setting Up the Printer
  • Epson DFX-8500 | User Manual - Page 34
    , you need to select serial communication by changing the printer's DIP switch settings. You may also need to change two other serial interface settings, serial baud rate and parity, before your printer and computer can communicate properly. See "Using DIP Switches" in Chapter 4 for more information
  • Epson DFX-8500 | User Manual - Page 35
    1-16 Setting Up the Printer
  • Epson DFX-8500 | User Manual - Page 36
    the printer driver 2-5 Changing the printer driver settings 2-6 For Windows 3.1 Users 2-8 Installing the printer driver 2-8 Accessing the printer driver 2-9 Changing the printer driver settings 2-11 For Windows NT 4.0 Users 2-12 Installing the printer driver 2-12 Accessing the printer driver
  • Epson DFX-8500 | User Manual - Page 37
    install the printer software, it is a good idea to make backup copies of the EPSON printer software disks. For Windows 95 Users Follow the steps below to install the printer driver for Windows 95. For instructions on installing the EPSON Status Monitor 2 utility, see Chapter 5. 2-2 Setting Up Your
  • Epson DFX-8500 | User Manual - Page 38
    your printer driver for Windows 95, you can install the EPSON Status Monitor 2 utility program. This utility monitors the status of your printer, alerts you when errors occur, and provides you with troubleshooting tips. See Chapter 5 for instructions on installing the Status Monitor. Setting Up
  • Epson DFX-8500 | User Manual - Page 39
    starts loading Windows 95. 3. If you use a password, enter it at the prompt. You see the New Hardware Found screen. Note: If you do not see the New Hardware Found screen, or if you run into any kind of problem, click Cancel and follow the instructions under "Installing the printer driver using My
  • Epson DFX-8500 | User Manual - Page 40
    you when errors occur, and provides you with troubleshooting tips. See Chapter 5 for instructions on installing and using the Status Monitor. Before you start printing, you should make sure that the printer driver settings match your document requirements. While many Windows applications override
  • Epson DFX-8500 | User Manual - Page 41
    Properties. The Properties window appears. 4. The Paper and Graphics menus contain the printer driver settings. Click the tabs at the top of the window to open these menus. Changing the printer driver settings Before printing, check that the printer driver settings on the Paper and Graphics menus
  • Epson DFX-8500 | User Manual - Page 42
    shows the effect of each setting. T Intensity Move the slider to make your printout lighter or darker. After you've checked your printer driver settings, you are ready to print. If you have any problems while printing, see Chapter 8 for troubleshooting guidelines. Setting Up Your Software 2-7
  • Epson DFX-8500 | User Manual - Page 43
    3.1 Users If you are using Windows 3.1, follow the instructions below to install and access the printer driver. Installing the printer driver 1. Make sure Windows 3.1 is running and the Program Manager window is open. 2. Insert Disk 1 of your printer driver software in a disk drive. 3. Choose
  • Epson DFX-8500 | User Manual - Page 44
    exit. 2 Windows will now use the EPSON DFX-8500 printer as its default printer on port LPT1. If you need to change the default printer or the port assignment, use the Printers utility in the Control Panel. Before you start printing, you should make sure that the printer driver settings match your
  • Epson DFX-8500 | User Manual - Page 45
    Accessing the printer driver from Windows applications To access the printer driver from your windows application, select Print Setup or Print from the File menu. If you choose Print Setup, you see your application's Print Setup dialog box, where you can make settings for paper size, paper source,
  • Epson DFX-8500 | User Manual - Page 46
    in the printer driver settings window. T Resolution Click the printing resolution you want. T Paper Size Select the size of the paper loaded in the printer. If you don't see your paper size, use the scroll bar to scroll through the list. If your paper size is not included in the list, click User
  • Epson DFX-8500 | User Manual - Page 47
    checked your printer driver settings, you are ready to print. If you have any problems while printing, see Chapter 8 for troubleshooting guidelines. For Windows NT 4.0 Users If you are using Windows NT 4.0, follow the instructions below to install and access the printer driver. Note: Printer driver
  • Epson DFX-8500 | User Manual - Page 48
    EPSON Printer Driver Setup dialog box shown below. Click OK and follow the on-screen instructions. 2 Before you start printing, you should make sure that the printer driver settings match your document requirements. While many Windows applications override the printer settings made with the driver
  • Epson DFX-8500 | User Manual - Page 49
    driver from the Print dialog box, choose Printer, Setup, Properties, or Options, depending on the options available in your application. (You may need to choose a combination of these options.) The Properties window appears. The Page Setup and Advanced menus contain the printer driver settings
  • Epson DFX-8500 | User Manual - Page 50
    printer driver settings Before printing, check that the printer driver settings on the Page Setup and Advanced menus are appropriate for the kind of document you want to print, and change settings as needed. When you are finished making changes, click OK to apply the 2 settings Paper source list
  • Epson DFX-8500 | User Manual - Page 51
    On or Off in each list box. After you've checked your printer driver settings, you are ready to print. If you have any problems while printing, see Chapter 8 for troubleshooting guidelines. For Windows NT 3.5x Users If you are using Windows NT 3.5x, follow the instructions below to install and
  • Epson DFX-8500 | User Manual - Page 52
    in the EPSON Printer Driver Setup dialog box as shown below. Click OK and follow the 2 on-screen instructions. Before you start printing, you should make sure that the printer driver settings match your document requirements. While many Windows applications override the printer settings made with
  • Epson DFX-8500 | User Manual - Page 53
    access the printer driver from the Windows NT 3.5x Control Panel, the settings you make apply to any applications you open afterward. To access the printer driver from the Control Panel, follow these steps: 1. In the Main window, double-click the Print Manager icon. The Print Manager window appears
  • Epson DFX-8500 | User Manual - Page 54
    the printer driver settings are appropriate for the kind of document you want to print, and change the settings as needed. When you are finished making changes, click OK to apply the settings, or click Cancel to cancel your settings. Printer Setup dialog box T Forms Source Select the paper source
  • Epson DFX-8500 | User Manual - Page 55
    Halftone. The Halftone Color Adjustment dialog box appears. For details, click Help in this dialog box. After you've checked your printer driver settings, you are ready to print. If you have any problems while printing, see Chapter 8 for troubleshooting guidelines. 2-20 Setting Up Your Software
  • Epson DFX-8500 | User Manual - Page 56
    (not Windows applications), follow the instructions below to install the printer driver. 2 Installing the printer driver To install a printer driver in most DOS applications, you must select the printer you are using during the installation or setup procedure. Choose the EPSON DFX-8500 printer at
  • Epson DFX-8500 | User Manual - Page 57
    2-22 Setting Up Your Software
  • Epson DFX-8500 | User Manual - Page 58
    the paper supply 3-2 What paper types you can use 3-3 3 Loading Paper onto the Front Tractor 3-4 Loading Paper onto the Rear Tractor 3-10 Adjusting the Paper Position 3-17 Adjusting the top-of-form position 3-17 Adjusting the printing position 3-20 Tearing Off the Printed Pages
  • Epson DFX-8500 | User Manual - Page 59
    and operate, and both accommodate a wide variety of paper types, including labels and multi-part forms. The printer automatically adjusts to the thickness of your loaded paper, so you don't need to make any manual adjustments to the paper thickness settings. You can print on continuous paper from
  • Epson DFX-8500 | User Manual - Page 60
    your stack of printed pages does not interfere with the rear tractor's paper supply. What paper types you can use You can use the continuous paper types listed below. (For some paper types, the rear tractor is not available.) Continuous Paper Types Single-sheet Multi-part Labels Continuous forms
  • Epson DFX-8500 | User Manual - Page 61
    onto the Front Tractor Follow these steps to load paper onto the front tractor: 1. Turn off the printer, then open the printer's front cover by lifting up the middle of its bottom edge until it locks in Caution: Do not try to pull on or remove the elastic cord from the tractor. 3-4 Paper Handling
  • Epson DFX-8500 | User Manual - Page 62
    place by pushing up the sprocket lock lever. arrow mark on the scale 3 4. Now slide the right sprocket to approximately match the width of your paper. (Do not lock it in place yet
  • Epson DFX-8500 | User Manual - Page 63
    5. Slide the two paper supports so that they are spaced evenly between the two sprockets. paper supports 6. Open both sprocket covers. sprocket cover 3-6 Paper Handling
  • Epson DFX-8500 | User Manual - Page 64
    , and then fit the first five holes in the paper over the sprocket pins as shown below. The side of the paper that you want to print on should be facing you. Now close the sprocket covers. 3 8. Slide the right sprocket so that the paper is straight and has no wrinkles. Lock the sprocket
  • Epson DFX-8500 | User Manual - Page 65
    have removed all protective materials. (See the Notice Sheet for instructions.) Turning on the printer while the print head cannot move may seriously damage the mechanism. 10. Turn on the printer. The print head moves to the left and the Power and Paper Out lights come on. Also, either the front or
  • Epson DFX-8500 | User Manual - Page 66
    the printer switches tractors, it also loads the paper automatically. The Tractor Select indicator changes to green and the Paper Out light turns off. The paper is now loaded to the top-of-form position. If it looks like the printing will start too high or low on the page, adjust the paper position
  • Epson DFX-8500 | User Manual - Page 67
    the Rear Tractor Follow the steps below to load paper onto the rear tractor. (You do not need to remove the paper from the front tractor first.) 1. Turn off the printer. 2. Open the printer's top cover as shown below. 3. Open the rear flap at the back of the top cover. rear flap 3-10 Paper Handling
  • Epson DFX-8500 | User Manual - Page 68
    the left of the arrow mark on the scale. Lock it in place by pulling the sprocket lock lever forward. arrow mark on the scale Paper Handling 3-11
  • Epson DFX-8500 | User Manual - Page 69
    6. Now slide the right sprocket to approximately match the width of your paper. (Do not lock it in place yet.) 7. Slide the two paper supports so they are spaced evenly between the two sprockets. paper supports 3-12 Paper Handling
  • Epson DFX-8500 | User Manual - Page 70
    sprocket covers. sprocket cover 3 9. Make sure your paper has a clean, straight edge. With the side of the paper you want to print on facing down, insert your paper through the opening at the rear of the printer. Note: You may find it easier to load the paper by standing to the side. That way you
  • Epson DFX-8500 | User Manual - Page 71
    the paper. Make sure the paper is straight and has no wrinkles. Pull the sprocket lock lever forward to lock the sprocket in place. After you lock the right sprocket, it may still move slightly; this is normal. sprocket lock lever Note: Be careful not to pull the paper too tightly when adjusting the
  • Epson DFX-8500 | User Manual - Page 72
    12. Close the top cover and the rear flap. The paper is now loaded in the standby position. 3 13. Turn on the printer. The print head moves to the left and the Power and Paper Out lights come on. Also, either the front or rear tractor arrow on the Tractor Select indicator lights up, depending on
  • Epson DFX-8500 | User Manual - Page 73
    the printer switches tractors, it also loads the paper automatically. The Tractor Select indicator changes to green and the Paper Out light turns off. The paper is now loaded to the top-of-form position. If it looks like the printing will start too high or low on the page, adjust the paper position
  • Epson DFX-8500 | User Manual - Page 74
    software. To change the print position, adjust your software's print settings. Use the following procedure only if your software does not allow print position adjustment. Adjusting the top-of-form position The top-of-form position is the position to which the printer feeds the paper when it loads it
  • Epson DFX-8500 | User Manual - Page 75
    (1.33 inch) below the top edge of the paper. The factory setting is 5.8 mm (0.2 inch). Follow the steps below to reset (permanently change) the top-of-form position. c Caution: To adjust the top-of-form position when labels are loaded in the printer, use the forward-feeding (top) Micro Feed button
  • Epson DFX-8500 | User Manual - Page 76
    paper to the desired top-of-form position. The red line on the ribbon protector shows you where the bottom edge of your first line of text will print print five lines below the top-of-form position. 3 Note: The red line on the ribbon behind the print ribbon. 5. paper, you can set the loading and
  • Epson DFX-8500 | User Manual - Page 77
    remembers this temporary top-of-form position until the next time you load paper, switch tractors, or turn off the printer. To adjust the printing position or top-of-form position, follow these steps: 1. Start printing your document. When you reach the text that you want to align at a particular
  • Epson DFX-8500 | User Manual - Page 78
    on the control panel. (See Chapter 4 for information on changing DIP switch settings.) If the perforation between pages is not aligned with the tear-off edge, you can adjust the tear-off position using the micro-feed feature. The printer remembers this new tear-off position. c Caution: Never use
  • Epson DFX-8500 | User Manual - Page 79
    DIP switch 3-1 on. 3. Turn the printer on. When tear-off mode is on and you print on continuous paper on the push tractor, the printer advances the final printed page to the tear-off position. Then you can tear off all printed pages. If the perforation is not aligned with the tear-off edge, adjust
  • Epson DFX-8500 | User Manual - Page 80
    is not aligned with the tear-off edge, adjust the tear-off position as described in the next section. 3. When you resume printing, the printer feeds the paper back to the loading position and begins printing. (You can also manually feed the paper back to the loading position by pressing the Tear
  • Epson DFX-8500 | User Manual - Page 81
    the tear-off mode. The Tear Off light comes on and the printer feeds the paper's perforation to the printer's tear-off edge. 4. If the paper is not aligned with the tear-off edge, press the Micro Feed buttons to feed the paper forward or backward in 1/216-inch increments. (You can also hold down
  • Epson DFX-8500 | User Manual - Page 82
    page using the tear-off edge on the printer's top cover. 3 6. Press the Tear Off button to feed the paper back to the top-of-form position. You are now ready to print your next document. c Caution: Always tear off the printed document before you feed the paper back to the top-of-form position
  • Epson DFX-8500 | User Manual - Page 83
    a document, wait for the printer to finish printing before you switch tractors. Then follow these steps: 1. If no paper is loaded in the rear tractor, load paper to the standby position (the first five pins of the sprockets), as described in steps 2 through 13 on page 3-10. 3-26 Paper Handling
  • Epson DFX-8500 | User Manual - Page 84
    the previous section to tear off the document or excess paper. 3 c Caution: Always tear off the printed document and any excess paper before switching tractors. Never feed more than one page backward through the printer. 3. Press the Front/Rear button to switch to the rear tractor. The front-loaded
  • Epson DFX-8500 | User Manual - Page 85
    -part forms with labels are already loaded in the printer. Remove the labels by tearing off the fresh supply below the tractor and pressing LF/FF Load to eject the remaining labels. Then load the new paper as described earlier in this chapter. 1. If you have a printed document still in the printer
  • Epson DFX-8500 | User Manual - Page 86
    2. Press the Front/Rear button to switch to the rear tractor. The front-loaded paper automatically feeds back to the standby position. 3 3. Open the printer's front cover. (To change the rear-loaded paper, open the printer's top cover and the rear flap.) Paper Handling 3-29
  • Epson DFX-8500 | User Manual - Page 87
    4. Open the sprocket covers and remove the paper from the tractor. sprocket cover 5. Load the new paper as described in steps 2 through 11 on page 3-4 (or for rear-loaded paper, steps 4 through 14 beginning on page 3-11). 3-30 Paper Handling
  • Epson DFX-8500 | User Manual - Page 88
    to seven sheets (or six sheets on the rear tracor) including the original. The printer 3 automatically adjusts to the width and thickness of your paper. When you print on multi-part forms and labels, the positioning of your text on the page can be critical. For more information on aligning your
  • Epson DFX-8500 | User Manual - Page 89
    a clean straight edge and does not separate or tear apart. For instructions, see the sections on loading paper earlier in this chapter. When you use the paper memory feature described in Chapter 4, the DFX-8500 can print on multi-part forms that vary in thickness, such as forms with labels on them
  • Epson DFX-8500 | User Manual - Page 90
    Front/Rear button to switch tractors or change paper, remove the entire supply of labels. Remove labels by tearing off the fresh supply at a perforation below the tractor. Then press the LF/FF Load button to eject the remaining labels. T When adjusting the top-of-form or printing position, use only
  • Epson DFX-8500 | User Manual - Page 91
    3-34 Paper Handling
  • Epson DFX-8500 | User Manual - Page 92
    Printer Control Panel 4-2 Lights 4-2 Buttons 4-4 Other control panel features 4-8 Using DIP Switches 4-9 4 Changing DIP switch settings 4-9 DIP switch tables 4-11 DIP switch functions 4-16 Using the Paper Memory Feature 4-22 Saving paper memory settings 4-23 Using the Printer
  • Epson DFX-8500 | User Manual - Page 93
    you access to several powerful features. Lights Power Paper Out Ribbon Paper Select On when the power switch is on and power is supplied to the printer. On when the printer is out of paper. Comes on when there is no paper positioned behind the print head, even if paper is loaded on the tractors
  • Epson DFX-8500 | User Manual - Page 94
    change you make to the top-of-form position when this light on. On when the printer is in tear-off mode. The printer remembers any change you make to the tear-off position when this light is on. On when printing is paused. Blinks when the print head is hot. Press to temporally stop
  • Epson DFX-8500 | User Manual - Page 95
    using the DIP switches and control panel. See page 4-22 for details. Select 1 to 8 if you have registered paper information using the paper memory utility. See Chapter 5 for more information. Selects one of the following fonts: Super Draft, Draft, Roman, or Sans Serif. 4-4 Using the Printer
  • Epson DFX-8500 | User Manual - Page 96
    (Your software setting overrides this setting.) Lets you print the document darker. This button is available in SuperDraft and Draft mode only and is disabled if you use the status monitor utility and select a paper number from 1 to 8. Lets you enter and exit the top-of-form mode to adjust the top
  • Epson DFX-8500 | User Manual - Page 97
    to adjust the top-of-form, tear-off, and printing positions. To reset the top-of-form position, press the TOF button to enter top-of-form mode. Then use the Micro Feed buttons to move the paper to the desired position. See "Adjusting the top-of-form position" in Chapter 3. 4-6 Using the Printer
  • Epson DFX-8500 | User Manual - Page 98
    to reset the printer's control panel settings. Selects the front or rear tractor. If you have been using paper loaded on one tractor, first remove the printed output before pressing this button to switch the tractor. When you switch between tractors, the paper already loaded in the printer is fed
  • Epson DFX-8500 | User Manual - Page 99
    button while you turn on the printer, you can print the current DIP switch settings. See the next section for more information. By holding down the Paper Select button while you turn on the printer, you can register the paper form information when you use multi-part forms that overlap or forms with
  • Epson DFX-8500 | User Manual - Page 100
    on the printer. Changing DIP switch settings 1. Turn off the printer. 2. Open the printer's front cover by lifting the middle of its bottom edge until it locks in place. 3. The DIP switches are located in a small compartment on the front paper guide, behind the front tractor paper. If paper is
  • Epson DFX-8500 | User Manual - Page 101
    off before changing any DIP switches. 6. Close the DIP switch cover and replace the paper. 7. Close the front cover. 8. Turn on the printer to initialize the new settings. When you change a DIP switch setting, the new setting takes effect only after you turn on or reset the printer. 4-10 Using the
  • Epson DFX-8500 | User Manual - Page 102
    tables The following tables list the settings for each DIP switch. For more information about each feature, see the explanations following the tables. DIP switch 1 Switch Description ON OFF 1-1 Character table See Tables A-1 and Table A-2 1-2 1-3 4 1-4 1-5 1-6 1-7 Skip over perforation
  • Epson DFX-8500 | User Manual - Page 103
    OFF Active 10 sec. DIP switch 5 Switch 5-1 5-2 5-3 5-4 Description Overlapping multi-part forms Continuous forms with labels Skip over binding Paper memory ON Active Active Active Memory b * DIP switches 5-5 to 5-8 are not used. OFF Inactive Inactive Inactive Memory a 4-12 Using the Printer
  • Epson DFX-8500 | User Manual - Page 104
    OFF OFF OFF OFF Italic Spain OFF ON OFF OFF OFF ON PC437 is selected by all other switch combinations. Table A-2 Character table (available in certain countries) Character table PC437 (US, Standard Europe) OFF SW 1-6 OFF ON OFF ON OFF Continued on the next page Using the Printer 4-13
  • Epson DFX-8500 | User Manual - Page 105
    (Cyrillic) PC857 (Turkish) PC866 (Russian) PC869 (Greek) MAZOWIA (Poland) Code MJK (CSFR) ISO 8859-7 (Latin/Greek) ISO Latin 1T (Turkish) Bulgaria ON ON ON ON ON ON ON OFF OFF PC437 is selected by all other switch combinations. SW 1-4 ON ON ON OFF OFF OFF OFF ON ON ON ON 4-14 Using the Printer
  • Epson DFX-8500 | User Manual - Page 106
    2-7 OFF ON OFF OFF ON ON OFF OFF ON ON OFF SW 2-8 OFF ON OFF ON OFF ON OFF ON OFF ON OFF Using the Printer 4-15
  • Epson DFX-8500 | User Manual - Page 107
    functions The printer's DIP switch functions are described below. Character table When DIP switches 1-1 through 1-6 are set on and off in various combinations, you can select the character tables. If you use the IBM mode, you can use all character tables listed in Table A-1 except the Italic table
  • Epson DFX-8500 | User Manual - Page 108
    than those listed in Table B (Front) and Table C (Rear), see the printer commands in Appendix B. Be sure to set the page length to match the paper you plan to use. Auto tear off When DIP switch 3-1 is on, the printer automatically feeds continuous paper to the printer's tear-off edge. To adjust the
  • Epson DFX-8500 | User Manual - Page 109
    should use this feature only if your text is printing all on one line. Buzzer (beep) The printer beeps when an error occurs. See Chapter 8, "Troubleshooting," for more information. If you do not want the printer to beep, turn DIP switch 3-4 on. Auto CR (carriage return) This function is available
  • Epson DFX-8500 | User Manual - Page 110
    multi-part forms with labels. T If you set the cutting method through the printer driver's paper source setting, it overrides Auto cut mode. Software When DIP switch 3-8 is on, the printer operates in IBM 2381 Plus emulation mode. When this DIP switch is off, the printer operates in EPSON ESC
  • Epson DFX-8500 | User Manual - Page 111
    Table D (page 4-16) lists the DIP switch settings for automatic, parallel, serial, and optional interface modes. When you select Auto, the printer automatically selects the interface that is receiving data, and uses that interface until the end of the print job. This setting allows you to share the
  • Epson DFX-8500 | User Manual - Page 112
    your computer manual or application program for the correct serial baud rate setting. Your computer and printer should always be set to the same baud rate. 4 Overlapping multi-part forms, Continuous forms with labels, Paper memory By setting DIP switches 5-1, 5-2, and 5-4, you can print on multi
  • Epson DFX-8500 | User Manual - Page 113
    on them, you can use the paper memory feature for better print quality. It automatically adjusts the gap between the print head and the platen based upon the type of paper set in memory. This should give you better print quality. Overlapping multi-part forms Continuous forms with labels c Caution
  • Epson DFX-8500 | User Manual - Page 114
    Saving paper memory settings This procedure requires setting several DIP switches. See the section on changing DIP switch settings earlier in this chapter. 1. Make sure the printer is turned off. 2. Turn DIP switch 5-4 off to save your settings for memory a or on for memory b. 3. Select the page
  • Epson DFX-8500 | User Manual - Page 115
    and is ready to print. You have now finished all of the steps for saving information on forms. For continuous forms with labels or overlapping multi-part forms with labels, hold down the Paper Select button and turn on the printer. (The printer beeps once when it saves settings for memory a and
  • Epson DFX-8500 | User Manual - Page 116
    label's upper left corner. Use the Micro Feed buttons to move the paper up or down and manually move the print head left or right. 4 8. Press the TOF button. The printer beeps once. If the settings are not correct, the printer beeps five times. If this happens, repeat step 7. 9. Move the pointer to
  • Epson DFX-8500 | User Manual - Page 117
    labels information in the memory area you selected. The memory number you selected is displayed and the printer beeps three times, indicating that it is ready to print. To load paper memory settings, simply press the Paper Select button until the desired paper number is displayed. 4-26 Using the
  • Epson DFX-8500 | User Manual - Page 118
    Monitor 2 Installing EPSON Status Monitor 2 5-2 Accessing EPSON Status Monitor 2 5-3 Checking the Printer Status 5-4 Using the EPSON Status Monitor 2 window 5-4 Using the Printer Status window 5-8 5 Setting Monitoring Preferences 5-10 Turning on background monitoring 5-10 Using the background
  • Epson DFX-8500 | User Manual - Page 119
    the interface card. See the manual that comes with the interface card for instructions on using the Status Monitor in a network environment. Installing EPSON Status Monitor 2 To install the Status Monitor, follow these steps: 1. Make sure that you have installed the printer driver for Windows 95. If
  • Epson DFX-8500 | User Manual - Page 120
    letter) and click OK. 5. Follow the on-screen instructions, then click FINISH to complete the installation procedure. After you install EPSON Status Monitor 2 and restart your computer, the Status Monitor starts automatically and adds a printer-shaped background monitoring icon to the taskbar at the
  • Epson DFX-8500 | User Manual - Page 121
    a ready status, yellow indicates the need for routine maintenance, red indicates a printer error that makes printing impossible, and a dimmed icon indicates a communication problem between the Status Monitor and the printer. See online help for more information. 5-4 Using EPSON Status Monitor 2
  • Epson DFX-8500 | User Manual - Page 122
    detailed information on printer and print job status for any printer you select in the Installed Printers list. Click the Printer menu on the EPSON Status Monitor 2 5 window to access the following settings: T Printer Status Opens the Printer Status window, which provides detailed information
  • Epson DFX-8500 | User Manual - Page 123
    View menu This menu lets you control the appearance and content of the EPSON Status Monitor 2 window and the Installed Printers list. Click the View menu on the EPSON Status Monitor 2 window to access the following settings: T Toolbar/Status bar Displays or hides the toolbar and status bar in the
  • Epson DFX-8500 | User Manual - Page 124
    Click the Settings menu on the EPSON Status Monitor 2 window to access the following settings: T Monitoring Preferences Opens the Monitoring Preferences dialog box, where you can adjust the monitoring interval and change the background monitoring settings for the selected printer. For more
  • Epson DFX-8500 | User Manual - Page 125
    of the EPSON Status Monitor 2 window. Using the Printer Status window The Printer Status window shown below provides detailed information on the status of a selected printer. To open it, double-click a printer in the Installed Printers list, or select the printer and then choose Printer Status from
  • Epson DFX-8500 | User Manual - Page 126
    in the adjacent message box. If a printer error occurs, troubleshooting tips 5 appear in the message box at the bottom of this menu. Consumables menu This menu gives you information on paper that you registered using the paper memory utility. For instructions on registering or changing the
  • Epson DFX-8500 | User Manual - Page 127
    is active. (It is active if a printer-shaped icon appears on the taskbar at the bottom of your screen.) If the Status Monitor is inactive, open the EPSON Status Monitor 2 window, as described on page 5-3. Then point to Background Monitoring on the Settings menu and click Monitor from restart or
  • Epson DFX-8500 | User Manual - Page 128
    you want to monitor from the Installed Printers list, and then click Monitoring Preferences on the Settings menu. You see this dialog box: 5 3. Use the slider to adjust the monitoring interval, if necessary. Note: Setting a short monitoring interval may cause some applications to run more slowly
  • Epson DFX-8500 | User Manual - Page 129
    1 of "Turning on background monitoring" on page 5-10. Using the Paper Memory Utility This utility allows you to register up to eight types of paper with specific printing parameters so your computer and printer can easily determine how to handle individual print jobs. This should give you better
  • Epson DFX-8500 | User Manual - Page 130
    , and Epson, then click the Paper memory utility. Registering or changing your paper settings 5 Follow these steps to register or change paper information: 1. Click your printer from the Printer list, and then click Show List. The Paper Memory List window appears: Using EPSON Status Monitor
  • Epson DFX-8500 | User Manual - Page 131
    or an existing one, and then click Modify. You see the Modify Paper Memory dialog box: 3. Enter (or check) the appropriate information for each setting below: T Paper Name You can type a unique name for the paper. If the printer has information on memory a or memory b, you can only name them
  • Epson DFX-8500 | User Manual - Page 132
    a darker intensity. 4. When you are finished registering or making changes, click OK. The Paper Memory List window appears again. If you want to print these settings, click Print. The printer prints the list of memory numbers, names, and feed types. 5. Click Save. The comfirmation message appears
  • Epson DFX-8500 | User Manual - Page 133
    5-16 Using EPSON Status Monitor 2
  • Epson DFX-8500 | User Manual - Page 134
    6-18 6 Removing the perforation cutter 6-20 Using the Paper Cutter 6-24 Installing the paper cutter 6-24 Paper handling 6-28 Removing the paper cutter 6-32 Interface Cards 6-35 Installing an interface card 6-36 Using a serial interface card (C82305@ or C82306 6-38 Using Printer Options 6-1
  • Epson DFX-8500 | User Manual - Page 135
    the Pull Tractor The optional pull tractor (#8309) provides optimum continuous paper handling. The pull tractor is especially useful with continuous multi-part forms and labels. For best results, use the pull tractor with either the printer's front or rear built-in tractor, as described in this
  • Epson DFX-8500 | User Manual - Page 136
    -head screwdriver to remove the two screws securing the paper separator to the printer. Then lift the paper separator off the printer. 6 3. Using the two screws you just removed from the printer's original paper separator, install the paper separator that comes with the pull tractor. Using Printer
  • Epson DFX-8500 | User Manual - Page 137
    4. Close the paper separator cover and open the printer's top cover. 5. Holding the pull tractor with its gears to the left, fit the tractor's front notches over the mounting shaft of the printer. 6-4 Using Printer Options
  • Epson DFX-8500 | User Manual - Page 138
    parts (including the original), you should use the pull tractor with the printer's built-in front tractor. You can switch between the front and rear tractors at any time when you are using the pull tractor. Just press the Front/Rear button and then use the LF/FF Load button to feed the paper
  • Epson DFX-8500 | User Manual - Page 139
    in Chapter 3.) 3. Once you have paper loaded on the printer's front tractor, use the LF/FF Load button to advance the paper to the pull tractor. 4. Release both sprocket lock levers on the pull tractor by pulling them toward you. Then open both sprocket covers. 5. Adjust the sprockets to match the
  • Epson DFX-8500 | User Manual - Page 140
    supports so they are spaced evenly between the two sprockets. 7. Fit the sprocket holes of the paper over the sprocket pins. If there is slack in the paper or if the holes in the paper do not align properly with the sprocket pins, pull the paper slightly and use the pull tractor knob to adjust
  • Epson DFX-8500 | User Manual - Page 141
    remove any excess tension in your paper, release the right sprocket and lock it again. 10. Adjust the top-of-form position as described in Chapter 3, if necessary. 11. Close the top cover. Press the LF/FF Load button to feed the paper out the back of the printer. Make sure the edge of the
  • Epson DFX-8500 | User Manual - Page 142
    distance to the pull tractor. To tear off printed pages, press the LF/FF Load button to advance the paper to a point where it can be torn off. The following steps explain how to load paper using the optional pull tractor (already installed) with the printer's built-in rear tractor. If you have
  • Epson DFX-8500 | User Manual - Page 143
    3. Tilt the tractor forward so that its pins rest on the metal frame of the printer. 4. Load paper onto the rear tractor as described beginning on page 3-10, steps 3 through 11. 5. Open the paper bail by lifting the tab on its right side. Then tilt the pull tractor back until the rear latches click
  • Epson DFX-8500 | User Manual - Page 144
    Removing the pull tractor To remove the pull tractor you'll need a cross-head screwdriver and the paper separator that was originally installed on the printer. 1. Remove any paper installed on the tractor and turn off the printer. 2. Open the top cover and locate the levers that lock the pull
  • Epson DFX-8500 | User Manual - Page 145
    . If you plan to load continuous paper from the rear tractor, be sure to leave enough room around the printer for the attached perforated paper output attachment and the output tray, and for the stack of fresh paper. Make sure you align your paper supply with the paper loaded in the tractor so the
  • Epson DFX-8500 | User Manual - Page 146
    need a cross-head screwdriver. 6 Note: If you plan to use the perforation cutter with the built-in rear tractor, you need to load paper onto the rear tractor before you install the perforation cutter. See "Loading Paper onto the Rear Tractor" in Chapter 3. 1. Turn off the printer and open the
  • Epson DFX-8500 | User Manual - Page 147
    2. Use a cross-head screwdriver to remove the two screws securing the paper separator to the printer. Then lift off the paper separator. Store the paper separator and screws for later use. 3. Close the paper separator cover and open the rear flap and remove it by lifting up to pull the pegs on the
  • Epson DFX-8500 | User Manual - Page 148
    facing to the right. Then lower the perforation cutter into the space at the back of the printer, fitting the pins on the sides of the perforation cutter into the notches in the printer. 6. After the perforation cutter is in place, push back the perforation cutter handle flat. Then close the
  • Epson DFX-8500 | User Manual - Page 149
    output tray. Note: T Stacked pages may be turned over on the output tray. T Do not allow the printer to stack more than 200 sheets of paper or 100 multi-part forms on the output tray. T Remove the output tray when you will be printing hundreds of pages and will not need to cut the
  • Epson DFX-8500 | User Manual - Page 150
    attachment to accommodate the page length of paper you use: second step: less than 9 inches third step: 10 to 11 inches fourth step: 12 inches paper onto the rear tractor, first remove the perforation cutter. See "Removing the perforation cutter" later in this chapter. Using Printer Options 6-17
  • Epson DFX-8500 | User Manual - Page 151
    can cut off a printed document using one of the following methods: T If you set the cutting method through the printer driver, the printer driver setting overrides the DIP switch's auto cut mode setting. You can select the following from the printer driver's paper source settings: Tractor Front: Do
  • Epson DFX-8500 | User Manual - Page 152
    DIP Switches" in Chapter 4. T Select the printer's tear-off mode as follows: 1. Make sure printing has finished. Open the paper separator . The printer feeds the paper's perforation to the perforation cutter's tear-off edge. 3. If the paper is not aligned with the tear-off edge, adjust the tear
  • Epson DFX-8500 | User Manual - Page 153
    the perforation cutter, store it in its original box and packing materials. 1. Cut off any printed document in the printer as described in the previous section. 2. Turn off the printer and open the paper separator cover. 3. Remove the perforated paper output attachment and the output tray from the
  • Epson DFX-8500 | User Manual - Page 154
    3. Unplug the paper cutter's connector from the printer. 4. Open the top cover. Grasp the handle on the perforation cutter and lift the perforation cutter up and out of the printer. 6 Using Printer Options 6-21
  • Epson DFX-8500 | User Manual - Page 155
    5. Close the top cover and open the paper separator cover. 6. Reattach the paper separator using the two screws that you removed before. 6-22 Using Printer Options
  • Epson DFX-8500 | User Manual - Page 156
    7. Close the paper separator cover. 8. To reattach the rear flap, fit the pegs on the rear flap into the notches at the back of the printer. Then close the rear flap. 6 Using Printer Options 6-23
  • Epson DFX-8500 | User Manual - Page 157
    Using the Paper Cutter The optional paper cutter (C81500@ ) makes using continuous paper easier by cutting off your printed documents for you. When you use the paper cutter, be sure to set the page length to match your paper using either your software or the printer's DIP switchs (described in
  • Epson DFX-8500 | User Manual - Page 158
    1. Turn off the printer and open the paper separator cover. 2. Use a cross-head screwdriver to remove the two screws securing the paper separator to the printer. Then lift off the paper separator. Store the paper separator and screws for later use. 6 3. Close the paper separator cover and open the
  • Epson DFX-8500 | User Manual - Page 159
    with the connector facing to the right. Then lower it into the space at the back of the printer, fitting the pins on the sides of the paper cutter into the notches in the printer. 5. After the paper cutter is in place, tilt the paper cutter handle forward. Then close the top cover. 6-26 Using
  • Epson DFX-8500 | User Manual - Page 160
    by lifting up to pull the pegs on the rear flap out of the notches at the back of the printer. Then plug the paper cutter's connector securely into the connector inside the printer. 6 7. To replace the rear flap, fit the pegs on the rear flap into the notches at the back of
  • Epson DFX-8500 | User Manual - Page 161
    This section describes how to use the paper cutter with continuous paper. When you use the paper cutter, you need to set the page length to match your paper. Cutting off a printed document To cut off a printed document, follow the steps below: 1. Be sure that the printer is turned on and that it is
  • Epson DFX-8500 | User Manual - Page 162
    .4 mm (1.0 inch) below the perforation at the end of the last printed page. The factory setting of the cutting position is 3.0 mm (0.12 inch) below the position. 4. Press the Tear Off button. The printer cuts off your printed document and feeds the fresh paper back to the top-of-form position. Using
  • Epson DFX-8500 | User Manual - Page 163
    off the Pause mode so the printer is ready to print. Note: The next printing position after the paper is cut depends on the cutting position and the top-of-form position, as described below. T When the cutting position is above the top-of-form position, the printer starts printing at the top-of-form
  • Epson DFX-8500 | User Manual - Page 164
    wait for the printer to finish printing before you switch tractors. 2. If no paper is loaded in the tractor you want to use, load paper as described in Chapter 3. 3. Press the Front/Rear button to switch to the other tractor. The printer cuts off the printed document, feeds the paper on the tractor
  • Epson DFX-8500 | User Manual - Page 165
    cutter, follow the steps below. After you remove the paper cutter, store it in its original box and packing materials. 1. Cut off any printed document in the printer as described in the previous section. 2. Turn off the printer. 3. Open the rear flap and remove it by lifting up to pull the pegs
  • Epson DFX-8500 | User Manual - Page 166
    4. To replace the rear flap, fit the pegs on the flap into the notches at the back of the printer. Then close the flap. 5. Open the top cover. Grasp the handle on the paper cutter and lift the paper cutter up and out of the printer. 6 Using Printer Options 6-33
  • Epson DFX-8500 | User Manual - Page 167
    6. Close the top cover and open the paper separator cover. 7. Reattach the paper separator using the two screws that you removed earlier. 8. Close the paper separator cover. 6-34 Using Printer Options
  • Epson DFX-8500 | User Manual - Page 168
    one interface at a time. See "Using DIP Switches" in Chapter 4. Coax and twinax interfaces enable the printer to communicate with an IBM minicomputer or mainframe via coax or twinax protocol. This allows EPSON printers to function as local IBM printers without the addition of any other circuitry or
  • Epson DFX-8500 | User Manual - Page 169
    optional interface card, make sure your printer's DIP switches are set for automatic or optional interface. See Chapter 4 for information on setting DIP switches. 1. Turn off both your printer and your computer. Then remove all power and interface cables from the printer. 2. Turn the printer so that
  • Epson DFX-8500 | User Manual - Page 170
    screwdriver to remove the screws securing the interface shield plate; remove the shield plate. 6. Slide the interface card into the grooves in the interface slot. Push it in firmly to make sure it connects to the printer's internal socket. 6 7. Secure the interface with the screws provided with the
  • Epson DFX-8500 | User Manual - Page 171
    1200, 2400, 4800, 9600, and 19200 bps (bits per second). To set the baud rate, see the bit-rate selection table in your interface card manual. Handshake timing When the unused area for data in the input buffer drops to 256 bytes, the printer outputs an X-OFF code or sets the DTR flag to 1 (MARK) to
  • Epson DFX-8500 | User Manual - Page 172
    Chapter 7 Maintenance and Transportation Replacing the Ribbon Cartridge 7-2 Cleaning the Printer 7-4 Transporting the Printer 7-5 7 Maintenance and Transportation 7-1 Maintenance
  • Epson DFX-8500 | User Manual - Page 173
    attempting to replace the ribbon. To replace the ribbon cartridge, follow these steps: 1. Press the Pause button. Then turn off the printer. 2. Open the printer's top cover and slide the print head to the exposed part of the paper bail. 3. Lift the ribbon guide off the print head as shown below
  • Epson DFX-8500 | User Manual - Page 174
    ribbon cartridge as shown below to release it from the printer's mounting pins. Remove the cartridge by lifting it up and away from you. c Caution: Make sure you don't pull on the flat gold cable beneath the ribbon cartridge. To install the new cartridge, see "Installing the Ribbon 7 Cartridge
  • Epson DFX-8500 | User Manual - Page 175
    Cleaning the Printer To keep your printer operating at its best, you should clean it thoroughly several times a year. Follow these steps: 1. Turn off the printer and close all of its covers. Then remove any paper as well as the paper guide. If you have installed the optional pull tractor,
  • Epson DFX-8500 | User Manual - Page 176
    1. Turn off the printer and remove any paper loaded in the printer. If any printer options are installed, remove them. 2. Unplug the power cord from the electrical outlet and the back of the printer. Disconnect the interface cable from the printer. 3. Remove the ribbon cartridge. 4. Install the
  • Epson DFX-8500 | User Manual - Page 177
    7-6 Maintenance and Transportation
  • Epson DFX-8500 | User Manual - Page 178
    Chapter 8 Troubleshooting 8 Troubleshooting Using the Error Indicators 8-3 Printing a Self Test 8-5 Using the Hex Dump Mode 8-6 Problems and Solutions 8-7 Power supply 8-8 Paper handling 8-9 Operation 8-13 Printout 8-15 Options 8-18 Clearing a Paper Jam 8-19 Troubleshooting 8-1
  • Epson DFX-8500 | User Manual - Page 179
    users may want to use this mode to pinpoint communication problems. T Problems and Solutions. This section describes how to solve problems with the power supply, paper handling, printer operation, and the quality of the printout. T Clearing a Paper Jam. This section shows you how to clear
  • Epson DFX-8500 | User Manual - Page 180
    Troubleshooting State of panel light n Paper Out n Pause f Paper Out n Pause f Ribbon n Pause f Paper Out f Ribbon n Pause f Pause Beep pattern − Problem and solution No paper is loaded in the printer. Load paper in the printer. The Paper Out light turns off and the printer resumes printing
  • Epson DFX-8500 | User Manual - Page 181
    not match the paper loaded in the printer. Load the correct paper or select the appropriate paper setting. The printer fails to switch to and feed the proper paper. Remove any paper in the printer and then press the Pause button to reload the paper you selected. An unknown printer error has occurred
  • Epson DFX-8500 | User Manual - Page 182
    Printing a Self Test 8 Running the printer's self test helps you determine whether the problem comes from the printer or the computer: Troubleshooting T If the self test results are satisfactory, the printer is working properly and the problem is probably caused by your printer driver settings,
  • Epson DFX-8500 | User Manual - Page 183
    that paper is loaded in the printer. 2. Hold down both the LF/FF Load and Tear Off buttons while you turn on the printer. 3. Next, run a software program and send a print job to the printer. Your printer prints all the codes it receives from the software in hexadecimal format. 8-6 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 184
    codes, are represented by dots. 4. To turn off hex dump mode, press the Pause button, and then turn off the printer. Troubleshooting Problems and Solutions This section divides printer problems into four categories: Power supply . . . . page 8-8 Paper handling . . . page 8-9 Operation page
  • Epson DFX-8500 | User Manual - Page 185
    outlet is working. If it is not, use a different outlet. A printer error has occurred and the control panel lights go off after 12 seconds. Turn off the printer and leave it for several minutes; then turn on the printer again. If the error occurs again, contact your dealer. 8-8 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 186
    , does not feed smoothly, or feeds at a slant. Cause What to do The paper supply is too far from the printer. Make sure your paper supply is positioned within 1 meter (3.28 feet) of the printer. The rear cover is open. Close the rear cover before trying to feed the paper. Troubleshooting 8-9
  • Epson DFX-8500 | User Manual - Page 187
    of paper. See the paper specifications in Appendix A. The print head is catching the binding area of your multi-part forms. Turn on DIP switch 5-3 to select the skip over binding function. Note: If paper jams in the paper path, see "Clearing a Paper Jam" later in this chapter. The printer does
  • Epson DFX-8500 | User Manual - Page 188
    incorrectly. Set DIP switch 2 to match your paper length. The top of form position is too high or too low. Adjust the top of form position so that the perforation is centered within the skip area. The top of form position changes while printing several pages. Cause What to do The paper may
  • Epson DFX-8500 | User Manual - Page 189
    remaining labels. When you switch between front and rear tractors, the printer does not load paper onto the selected tractor. Cause What to do The printer may be out of paper. Load paper onto the tractor. The tractor arrow on the Tractor Select indicator should be green. 8-12 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 190
    is not properly set up for your printer. Make sure that your printer is properly selected in your application software. If necessary, install or reinstall the printer driver software as described in Chapter 2. The Paper Out and Pause lights are on and the printer does not print. Cause What to
  • Epson DFX-8500 | User Manual - Page 191
    materials after turnning off the printer. Then turn on the printer. The printer stops printing and the Pause light is flashing. Cause What to do The print head is overheated. Wait a few minutes; the printer will resume printing automatically once the print head cools. 8-14 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 192
    in Chapter 1. The print head may be damaged. Stop printing and contact your dealer to have the print head replaced. w Warning: Never attempt to replace the head yourself because other parts of the printer must be checked at the same time. The typestyles or characters set in your application
  • Epson DFX-8500 | User Manual - Page 193
    A. The size of the paper loaded in the printer does not match the paper size setting within your application software. Load the correct size of paper, or change the paper size setting within your application software or printer driver to match the size of paper you are using. 8-16 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 194
    of paper you are using. Check the paper size setting in your application or printer driver. Page length for tractor may be set incorrectly using the DIP switches. Change DIP switch 2 to select the correct page length for the tractor. See "Using DIP Switches" in Chapter 4. Troubleshooting 8-17
  • Epson DFX-8500 | User Manual - Page 195
    See Chapter 2. You didn't set the auto cut mode. Turn on DIP switch 3-7 to select auto cut mode. However, any setting made in the printer driver overrides the auto cut mode setting. You don't set the page length Set the page length to match your to match your paper. paper. 8-18 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 196
    , tear off the fresh supply at the rear of the printer. 4. If the paper is caught in the paper ejection area, gently pull it out of the printer. 5. Close the printer cover and turn the printer back on. Make sure the Paper Out light is not flashing and the Pause light is not on. Troubleshooting 8-19
  • Epson DFX-8500 | User Manual - Page 197
    8-20 Troubleshooting
  • Epson DFX-8500 | User Manual - Page 198
    Appendix A Specifications Printer Specifications A-2 Printing A-2 Paper A-4 Mechanical A-13 Electrical A-14 Environmental A-14 Safety approvals A-15 A CE marking A-15 Parallel Interface Specifications A-16 Forward channel A-16 Reverse channel A-16 Serial Interface Specifications A-
  • Epson DFX-8500 | User Manual - Page 199
    Printer Specifications Printing Printing method: Printing speed: 9-pin impact dot matrix Characters per inch 10 cpi 10 cpi 10 cpi 12 cpi 12 cpi Quality High-speed draft Normal draft Near letter quality Draft Near letter quality Characters/second/line 1120 840 210 1008 252 Printing direction:
  • Epson DFX-8500 | User Manual - Page 200
    Character fonts: Font EPSON Super Draft EPSON Draft EPSON Roman (NLQ) EPSON Sans serif (NLQ) 128KB or 0KB (DIP switch selectable) Characters per inch available Available pitches (cpi) 10 10, 12, 15 10, 12, 15, proportional 10, 12, 15, proportional Character tables: Character sets: One Italic and
  • Epson DFX-8500 | User Manual - Page 201
    cut/uncut length at the perforation should be between 3:1 and 5:1. R The perforation between pages should not extend all the way to the edges of the paper, as shown below. R The thickness of the perforation part when extended should be 1 mm or less. printing side 1 mm or less A-4 Specifications
  • Epson DFX-8500 | User Manual - Page 202
    spot-gluing. A 1 inch or less 3 inches or less 1 inch or less 3 inches or less spot-gluing crimping printing side spot-gluing and crimping on each side R Never use continuous multi-part forms that are joined with metal staples or bar-gluing. bar-gluing metal stapling R The thickness of
  • Epson DFX-8500 | User Manual - Page 203
    .4 to 56.4 g/m2 (11 to 15 lb) (weight/part) and within the total thickness Plain paper, recycled paper, and carbonless printable area A The minimum top margin (below the the sprockets or set your application software so that the printer does not print outside the printable area. A-6 Specifications
  • Epson DFX-8500 | User Manual - Page 204
    Labels R R Labels should be securely attached to the backing sheet and the label surface should be flat. Labels should not peel off their backing sheet under the conditions below. label 27 mm wrapping drum radius wrapping angle wrapping time ambient temperature ambient humidity 27 mm 180° 24
  • Epson DFX-8500 | User Manual - Page 205
    .0 mm H (4 inches W × 17/16 inch H) 0.19 mm (0.0075 inch) maximum The difference in thickness must be less than 0.12 mm (0.0047 inch). Plain paper or the same quality labels with continuous backing sheet B A 13 mm (0.51 inch) or more B 2.6 mm (0.1 inch) or more A Continuous forms with labels Same
  • Epson DFX-8500 | User Manual - Page 206
    Area measurements A 13 mm (0.51 inch) B 55 mm (2.17 inches) C Total thickness : 0.53 mm (0.021 inch) maximum Printable area A printable area on a label D GF G D F label B A E E C Area measurements A 13 mm (0.51 inch) B 2.6 mm (0.1 inch) or more C 4.2 mm (0.165 inch) or more D 12.5 mm (0.49
  • Epson DFX-8500 | User Manual - Page 207
    forms Same as continuous paper (multi-part) except for the following: A A (side view) the bottom edge of overlapping form the top of overlapping form backing sheet thickness including glue point dilation: 0.7 mm (0.028 inch) or less Printable area B A A A-10 Specifications C B
  • Epson DFX-8500 | User Manual - Page 208
    Area measurements A 19 mm (0.75 inch) or more B 21.2 mm (0.84 inch) or more C 4.2 mm (0.17 inch) or more Overlapping multi-part forms with labels Same as labels except for the following: A A (side view) the top of B overlapping form label backing sheet D A the bottom edge of overlapping
  • Epson DFX-8500 | User Manual - Page 209
    mm (0.165 inch) or more Pre-printed paper Pre-printed paper is paper with white space in the middle and ruled lines, letters, or figures printed in the top and bottom margins. The margins are printed the first time the paper is loaded in the printer, and a document is printed in the white space the
  • Epson DFX-8500 | User Manual - Page 210
    (front and rear) Push-pull feed with optional pull tractor 26 million lines (except print head) 400 million characters Cartridge ribbon, available in black only (#8766). Do not use ribbons for 24-pin printers. Ribbon life expectancy is 15 million characters (at 14 dots/character). Height: 369 mm (14
  • Epson DFX-8500 | User Manual - Page 211
    ) Energy Star compliant This product is also designed for IT power systems with Phase to Phase voltage 220-240V. Environmental Temperature: Humidity: Operation: 5°C to 35°C (41°F to 95°F) Storage: −30°C to 60°C (−22°F to 140°F) Operation: 10% to 80% RH without condensation Storage: 5% to 85% RH
  • Epson DFX-8500 | User Manual - Page 212
    Safety approvals 120 V model: Safety standards EMI 230 V model: Safety standards EMI Acoustic noise: UL1950 with D3 CSA C22.2 No. 950 with D3 FCC part 15 subpart B class B CSA C108.8 class B EN 60950 (VDE, NEMKO) EN 55022 (CISPR pub. 22) class B AS/NZS 3548 class B Approx. 58 dB (A) (ISO 7779
  • Epson DFX-8500 | User Manual - Page 213
    Parallel Interface Specifications The printer comes with a bidirectional, 8-bit, parallel interface and a Type-B optional interface slot. Forward channel Transmission mode: Adaptable connector: Synchronization: Handshaking: Signal level: 8-bit parallel, IEEE-1284 compatibility mode 57-30360 (
  • Epson DFX-8500 | User Manual - Page 214
    DFX-8500 built-in serial interface is an RS-232C asynchronous interface with the following characteristics. Data format: 1 start bit Data word length: 8 bits Odd, even, no parity, or ignore 1 or more stop bit Paper 021 inches) maximum Weight Single sheets Multi-part forms 52.6 to 82.7 g/m2 (14
  • Epson DFX-8500 | User Manual - Page 215
    Environmental: Temperature Humidity (without condensation) Dimensions and weight Operation: 5° to 35°C (41° to 95°F) Storage: −30° to 60°C (− 22° to 140°F) Operation: 10% to 80% RH Storage: 5% to 85% RH Height: 130 mm (5.1 inches) Width: 510 mm (20.1 inches) Depth: 110 mm (4.3 inches) Weight: 6.4
  • Epson DFX-8500 | User Manual - Page 216
    Appendix B Printer Commands and Character Tables EPSON ESC/P Control Codes B-2 Barcode commands B-3 IBM 2381 Plus Emulation Control Codes B-6 Character Tables B-7 B Printer Commands and Character Tables B-1
  • Epson DFX-8500 | User Manual - Page 217
    ESC/P Control Codes Selecting EPSON ESC/P printer in your software allows you to use the most advanced font and graphics handling available. See the ESC/P Reference Manual for details. General operation: ESC@, ESC U, ESC EM Paper feeding: FF, LF, ESC 0, ESC 1, ESC 2, ESC 3, ESC A, CR Page format
  • Epson DFX-8500 | User Manual - Page 218
    Barcode commands Your printer has powerful barcode printing capabilities and includes the following resident barcode fonts: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, and POSTNET. See the Barcode commands below: ESC ( B Select Barcode Printing Format: ASCII code: ESC (
  • Epson DFX-8500 | User Manual - Page 219
    1: Under Bits 3−7 = Not used Barcode data Barcode data corresponds to the barcode symbology. The data number of each barcode type is constant. The barcode is printed only if the following valid characters are set. Barcode type EAN-13 EAN-8 Interleaved 2 of 5 UPC-A UPC-E Code 39 Code 128 POSTNET
  • Epson DFX-8500 | User Manual - Page 220
    2E, 2F) Set A, Set B, Set C The following conditions are required for barcode printing: T Barcode printing is always performed unidirectionally. However, when it is mixed with raster bit image data, neither barcode nor raster bit image data is printed. T A barcode is not printed when part of the
  • Epson DFX-8500 | User Manual - Page 221
    IBM 2381 Plus Emulation Control Codes This printer emulates the IBM Proprinter with the following commands. For detailed information, see IBM's 2381 Plus reference manual. General operation: NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F Paper feeding: FF, LF, ESC 5, ESC A, ESC 0,
  • Epson DFX-8500 | User Manual - Page 222
    the same as those for PC437. Therefore, some tables may only list characters for hex codes 80 through FF. Tables with an asterisk (*) after the table name are available only in some countries. When you select the IBM character table with DIP switch 3-6 as described in Chapter 4, 00 to 1FH and 80 to
  • Epson DFX-8500 | User Manual - Page 223
    PC437 (USA, standard Europe) PC850 (Multilingual) PC860 (Portuguese) B-8 Printer Commands and Character Tables
  • Epson DFX-8500 | User Manual - Page 224
    PC861 (Icelandic) PC863 (Canadian-French) B PC865 (Nordic) Abicomp Printer Commands and Character Tables B-9
  • Epson DFX-8500 | User Manual - Page 225
    Roman 8 BRASCII ISO Latin 1 B-10 Printer Commands and Character Tables
  • Epson DFX-8500 | User Manual - Page 226
    PC437 Greek PC852 (East Europe)* PC853 (Turkish)* B PC855 (Cyrillic)* Printer Commands and Character Tables B-11
  • Epson DFX-8500 | User Manual - Page 227
    PC857 (Turkish)* PC866 (Russian)* PC869 (Greek)* MAZOWIA (Poland)* B-12 Printer Commands and Character Tables
  • Epson DFX-8500 | User Manual - Page 228
    Code MJK (CSFR)* ISO 8859-7 (Latin/Greek)* ISO Latin 1T (Turkish)* B Bulgaria (Bulgarian)* Printer Commands and Character Tables B-13
  • Epson DFX-8500 | User Manual - Page 229
    Estonia (Estonia)* PC774 (LST 1283 : 1993)* ISO 8859-2* PC866 LAT. (Latvian)* B-14 Printer Commands and Character Tables
  • Epson DFX-8500 | User Manual - Page 230
    PC866UKR* PC APTEC (Arabic)* PC708 (Arabic)* B PC720 (Arabic)* Printer Commands and Character Tables B-15
  • Epson DFX-8500 | User Manual - Page 231
    PC AR864 (Arabic)* Italic No character is available for hex code 15 in the italic character table. B-16 Printer Commands and Character Tables
  • Epson DFX-8500 | User Manual - Page 232
    on the table below are used in the italic character table. The following eight international character sets can be selected with the DIP switches or with the ESC R command. B The following five additional sets can be selected only with the ESC R command. Printer Commands and Character Tables B-17
  • Epson DFX-8500 | User Manual - Page 233
    Symbol set Characters defined in the following symbol set can be printed using the ESC \ (characters) or ESC ^ (one character) software command. This is available in the IBM emulation mode. B-18 Printer Commands and Character Tables
  • Epson DFX-8500 | User Manual - Page 234
    Kingdom and the Republic of Ireland Users . . . . C-4 Enquiry Desk C-4 Customer Support C-4 Faxon EPSON C-5 EPtec - Bulletin Board Service for latest drivers and utilities C-5 World Wide Web C-5 For Australian Users C-6 EPSON FAXBACK C-6 EPSON Bulletin Board System C-6 Internet URL http://www
  • Epson DFX-8500 | User Manual - Page 235
    your printer is not operating properly and you cannot solve the problem using the troubleshooting information in this guide, contact customer support services for assistance. We will be able to help you much more quickly if you give us the following information: Serial number of your printer. (The
  • Epson DFX-8500 | User Manual - Page 236
    ready: T Product name T Product serial number T Computer configuration T Description of the problem C You can purchase ink cartridges, paper, manuals, accessories, and parts from EPSON Accessories at (800) 873-7766 (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral
  • Epson DFX-8500 | User Manual - Page 237
    Users If you purchased your printer in the UK or the Republic of Ireland, Epson (UK) Limited provides a range of customer services and technical support. Note: For customers in the Republic of Ireland, please use the correct dialing codes when dialing the UK telephone numbers listed in the following
  • Epson DFX-8500 | User Manual - Page 238
    Faxon EPSON Contact Faxon EPSON Faxback Service for: T Literature and specifications on the latest EPSON products T Support information including troubleshooting tips, switch settings and driver information To use Faxon EPSON, call 01442 227332 using a touch-tone phone. You will be asked to follow a
  • Epson DFX-8500 | User Manual - Page 239
    wishes to provide you with a high level of Customer Service. As well as this User's Guide, we provide the following sources for obtaining information: EPSON FAXBACK EPSON FAXBACK will fax you the latest specifications and pricing for most EPSON products offered in Australia. There is also technical
  • Epson DFX-8500 | User Manual - Page 240
    can help solve the problem. This information includes the User's Guide for your EPSON product, type of computer, operating system, application programs, Users To obtain technical support as well as other after-sales services, users are welcome to contact EPSON Hong Kong Limited. Contacting Customer
  • Epson DFX-8500 | User Manual - Page 241
    ://www.epson.com.hk. Electronic bulletin board system An electronic bulletin board system (BBS) is also available to obtain printer information and the latest versions of printer drivers. You can log on to the following number for the BBS service: BBS: (852) 2827-4244 Technical Support Hotline
  • Epson DFX-8500 | User Manual - Page 242
    can be used for graphic symbols or italic characters. characters per inch (cpi) A measure of the size of text characters, often referred to as pitch. 10 cpi is the printer's default setting. continuous paper Paper that has sprocket-feed holes on both sides, is perforated between pages, and is
  • Epson DFX-8500 | User Manual - Page 243
    the print heads for the extra thickness of the labels. Before printing on this kind of paper, measure the label thickness using the paper memory feature. default A value or setting that takes effect when the equipment is turned on, reset, or initialized. DIP switches Small switches in a printer that
  • Epson DFX-8500 | User Manual - Page 244
    troubleshooting feature that helps advanced users detect the cause of communication problems between the printer and computer. When the printer is in hex dump mode, it prints each code that it receives in hexadecimal notation and ASCII code. Also called data dump. high-speed draft One of three print
  • Epson DFX-8500 | User Manual - Page 245
    and continuous forms with labels. Be sure to follow any special instructions intended for either type. For this paper, make the thickness settings using the paper memory feature. paper bail The part of the printer that holds the paper flat against the platen. parallel interface See interface. parity
  • Epson DFX-8500 | User Manual - Page 246
    again. self test A method of checking the operation of the printer. When you run the self test, the printer prints the built-in characters in its ROM (Read Only Memory). serial interface See interface. standby position The position the paper is in after you manually load it onto the first few pins
  • Epson DFX-8500 | User Manual - Page 247
    GL-6 Glossary
  • Epson DFX-8500 | User Manual - Page 248
    features, 4-8 Copy button, 4-5 light, 4-3 Customer support, C-1-8 D DIP switch functions, 4-16-21 changing settings, 4-9-10 tables, 4-11-16 Dithering setting, 2-7, 2-12 DOS, driver installation, 2-21 Driver. See Printer driver E Emulation, IBM, 4-19 EPSON Status Monitor 2 utility, 5-2-12 checking
  • Epson DFX-8500 | User Manual - Page 249
    onto the front tractor, 3-4-9 onto the rear tractor, 3-10-16 M Maintenance, 7-2-4 Micro Feed button, 4-6-7 Multi-part forms printing on, 3-31-32 setting, 4-21 using, 3-3, 3-32 O Options, 2 interface cards, 6-35-38 paper cutter, 6-24-34 perforation cutter, 6-12-23 pull tractor, 6-2-12 Orientation
  • Epson DFX-8500 | User Manual - Page 250
    the printer, 1-10 Positioning the paper supply, 3-2-3 Power light, 4-2 Print direction setting, 4-17 Printer driver accessing, Windows 3.1, 2-9-10 Windows 95, 2-5-6 Windows NT 3.5x, 2-17-19 Windows NT 4.0, 2-13-14 changing, Windows 3.1, 2-11-12 Windows 95, 2-6-7 Windows NT 3.5x, 2-19-20 Windows NT
  • Epson DFX-8500 | User Manual - Page 251
    printer, 7-5 Troubleshooting error indicators, 8-3-4 hex dump, 8-6-7 operation, 8-13-14 options, 8-18-19 paper handling, 8-9-12 power supply, 8-8 printout, 8-15-18 problems and solutions, 8-7-19 self test, 8-5-6 U Unidirectional (Uni-d) printing, print direction setting, 4-17 Unpacking the printer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251