Epson DFX-8500 User Manual - Page 214
Serial Interface Specifications, Optional Perforation Cutter Specifications
View all Epson DFX-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Serial Interface Specifications The DFX-8500 built-in serial interface is an RS-232C asynchronous interface with the following characteristics. Data format: 1 start bit Data word length: 8 bits Odd, even, no parity, or ignore 1 or more stop bit Signal level: Mark logical "1" (−3 V to −25 V) Space logical "0" (+3 V to +25 V) Handshaking: Handshaking by DTR signal or Xon/Xoff. Bit rate: 2400, 4800, 9600, 19200 bps Connector plug: EIA 25-pin connector A Optional Perforation Cutter Specifications The specifications below apply to the optional perforation cutter (C81507@ ). Paper: Width 101 to 406 mm (4 to 16 inches) Length/page 101 to 431 mm (4 to 17 inches) Number of copies 7 sheets (1 original + 6 copies) Total thickness 0.53 mm (0.021 inches) maximum Weight Single sheets Multi-part forms 52.6 to 82.7 g/m2 (14 to 22 lb) 41.4 to 56.4 g/m2 (11 to 15 lb) × n (n ≤ 7) and within the total thickness Note: You cannot use labels, overlapping multi-part forms, continuous forms with labels, or overlapping multi-part forms with labels. Specifications A-17