Epson EMP-503C Product Information Guide - Page 2

EPSON PowerLite 503c/713c Projector Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a computer, the computer's video card must be set at a refresh rate (vertical frequency) that's compatible with the projector; see the following table for compatible formats. As noted below, some images are automatically resized to display in one of the projector's "native" formats (such as XGA). In addition, the frequencies of some computers may not allow images to display correctly; see your computer's documentation for details. Mode VGAEGA VGA60 VGA72 VGA75 VGA85 VGA Text VGA Text SVGA56 SVGA60 SVGA72 SVGA75 SVGA85 XGA43i XGA60 XGA70 XGA75 XGA85 SXGA1-70 SXGA1-75 SXGA1-85 SXGA2-60 SXGA2-75 SXGA2-85 SXGA3-43i SXGA3-60 SXGA3-75 SXGA3-85 UXGA60 MAC13 MAC16 MAC19-60 MAC19 MAC21 NTSC PAL SECAM Refresh Rate (Hz) 70 59.94 72.809 75 85.008 70.087 70.087 56.25 60.317 72.188 75 85.061 43.476 60.004 70.069 75.029 84.997 70.012 75 84.999 60 75 85.002 43.436 60.02 75.025 85.024 60 66.67 75.087 59.28 74.93 75.062 60 50 50 Resolution 640 x 350 640 x 480 640 x 480 640 x 480 640 x 480 720 x 350 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 7681 1024 x 7681 1024 x 7681 1024 x 7681 1024 x 7681 1152 x 8642 1152 x 8642 1152 x 8642 1280 x 9602 1280 x 9602 1280 x 9602 1280 x 10242 1280 x 10242 1280 x 10242 1280 x 10242 1600 x 12003 640 x 480 832 x 6241 1024 x 7681 1024 x 7681 1152 x 8702 640 x 4802 720 x 5402 720 x 5402 1 The image is resized so that it displays using one of the projector's native formats (PowerLite 503c only). 2 The image is resized so that it displays using one of the projector's native formats. 3 Not supported on the PowerLite 503c. Computer Connector Pin Assignments The Computer/Component video port is a female video RGB, 15-pin micro-D-style connector. The pin assignments are: Input pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Computer connector signals Red video Green video Blue video GND GND Red GND Green GND Blue GND Reserved Synchronous GND GND SDA Horizontal sync/composite sync Vertical sync SCL Projector Placement Guidelines ❏ Place the projector on a sturdy, level surface, between 3.6 and 45.5 feet from the screen. ❏ Make sure there is plenty of space for ventilation around and under the projector. ❏ Make sure the projector is within 6 feet of a grounded electrical outlet or extension cord and within 5 feet of your computer and/or video source. ❏ Place the projector directly in front of the center of the screen, facing it toward the screen squarely. Otherwise, your image will not be square. 2 - EPSON PowerLite 503c/713c Projector 9/01