Epson EMP-503C Product Information Guide - Page 9
Optional Accessories, Related Documentation
View all Epson EMP-503C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
EPSON PowerLite 503c/713c Projector Follow these steps to replace the lamp: 1. Turn off the projector, then unplug the power cord. 2. Allow the projector to cool down for at least half an hour (if it has been on). Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 3. Turn the projector upside-down to access the lamp compartment. 4. Use a screwdriver to loosen the retaining screw on the lamp cover. (You can't remove the screw from the cover.) Then lift off the lamp cover. ) Optional Accessories Product Product number Replacement lamp and air filter ELPLP14 Soft carrying cases: Samsonite® wheeled soft case (16.75" x 15" x 9") Samsonite wheeled soft case (22" x 15" x 9") Slimline soft shoulder bag Notebook/projector soft shoulder bag ATA molded hard shell case ELPKS24 ELPKS35 ELPKS31 ELPKS32 ELPKS30 Ceiling mount Kensington MicroSaver® security lock ELPMB32 ELPSL01 Portable projection screens: 50-inch screen 60-inch Insta-Theatre screen 80-inch Insta-Theatre screen ELPSC06 ELPSC07 ELPSC08 Wireless microphone and two satellite speakers ELPCVSII Presentation audio system ELPPAS1 Macintosh adapter set (includes monitor adapter and ELPAP01 desktop adapter) High resolution document imager ELPDC02 Motion presentation camera ELPDC03 Distribution amplifier ELPDA01 5. Use a screwdriver to loosen the two screws holding the lamp in place. (You can't remove these screws.) 6. Lift up the wire handle, as shown, and pull the lamp straight out. handle Related Documentation CPD-12796 CPD-12797 CPD-12798 Service Manual Parts Price List EPSON PowerLite 503c/713c User's Guide EPSON PowerLite 503c/713c Quick Setup sheet CD-ROM containing projector software and software User's Guide, and projector User's Guide TM-EMP503+ PL-EMP503 PL-EMP713 Caution: Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 7. Gently insert the new lamp. 8. Once the lamp is fully inserted, tighten its screws. 9. Replace the lamp cover and tighten its screw securely. (The projector won't come on if the lamp cover is loose.) 9/01 EPSON PowerLite 503c/713c Projector - 9