Epson Expression 10000XL - Photo Edition Start Here Card - Page 3
Install the Transparency Unit
View all Epson Expression 10000XL - Photo Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Install the Transparency Unit If you have the Photo version of the scanner, you need to install the transparency unit. 1 Fully open the scanner's document cover, then lift it straight up. 2 Lower the transparency unit onto the scanner, so that the pins fit into the holes as shown. 3 Use a coin to turn the transportation lock to the Unlock position. 4 Close the transparency unit. 5 Connect the transparency unit cable to the scanner's OPTION port, then tighten its screws.
Install the Transparency
Unit
If you have the Photo version of the scanner, you need to install the
transparency unit.
1
Fully open the scanner’s document cover, then lift it straight up.
2
Lower the transparency unit onto the scanner, so that the pins fit into
the holes as shown.
3
Use a coin to turn the transportation lock to the
Unlock
position.
4
Close the transparency unit.
5
Connect the transparency unit cable to the scanner’s
OPTION
port, then
tighten its screws.
3