Epson Expression 1640XL - Graphic Arts User Manual - Page 43

Using the Film Guides, Start Here

Get Epson Expression 1640XL - Graphic Arts - Expression 1640XL- Graphics Arts PDF manuals and user guides View all Epson Expression 1640XL - Graphic Arts manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

8. Connect the transparency unit's connector to the option (ADF/TPU) connector at the back of the scanner. Tighten the attached screws to secure the connector. If you haven't connected the scanner to your computer, see the Start Here sheet for instructions. Then plug the scanner in and turn it on. See Chapter 2 for scanning instructions. Using the Film Guides You can use the four film guides that came with the scanner to scan 35 mm slides, strips of 35 mm negative or positive film, 120-size or 220-size format film, and 4 × 5-inch film. When using the film guides, be sure the transparency unit is completely closed and the calibration area (next to the notch on the transparency guide) is uncovered or an error will occur and you will be unable to scan. Store the reflective document mat in the transparency unit pocket when not in use. Using Optional Equipment 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Using Optional Equipment
37
8.
Connect the transparency unit’s
connector to the option
(
ADF/TPU
) connector at the
back of the scanner. Tighten the
attached screws to secure
the connector.
If you haven’t connected the scanner to your computer, see the
Start Here
sheet for
instructions. Then plug the scanner in and turn it on.
See Chapter 2 for scanning instructions.
Using the Film Guides
You can use the four film guides that came with the scanner to scan 35 mm slides,
strips of 35 mm negative or positive film, 120-size or 220-size format film, and
4
×
5-inch film.
When using the film guides, be sure the transparency unit is
completely closed and the calibration area (next to the notch on the
transparency guide) is uncovered or an error will occur and you will be
unable to scan.
Store the reflective document mat in the transparency unit pocket
when not in use.