Epson FX-2170 User Manual - Page 69
Labels, Never, backward, Load/Eject, Off/Bin, Then use, LF/FF
View all Epson FX-2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Labels When selecting labels for printing, always choose the type mounted on a continuous backing sheet with sprocket holes for use with a tractor. Do not try to print labels as single sheets because the shiny backing sheet does not feed properly. Load labels from either the front or bottom (not rear) paper slots with the tractor in the pull tractor position. You load them the same way that you load continuous paper, except you set the paper thickness lever to position 2. See "Using Continuous Paper" earlier in this chapter for details. Caution: Never feed labels backward with the Load/Eject or Tear Off/Bin buttons. Labels can easily peel off the backing and jam the printer. Since labels are especially sensitive to temperature and humidity, use them only under normal operating conditions. Do not leave labels loaded in the printer between jobs; they curl around the platen and may jam when you resume printing. To remove labels from the paper path after you finish printing, first tear off the labels at a point before the paper slot. Then use the LF/FF button to advance the remaining labels out of the printer. 2-28 Paper Handling