Epson LX-810 User Manual - Page 203
or the sprocket covers may be open., Position the sprocket units to match
View all Epson LX-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Problem Paper Handling Solution The position of your paper supply may be preventing it from feeding straight. Refer to 2-7. The paper may be caught on the edge guides. When using continuous paper, make sure that the paper guide is installed over the paper and that the edge guides are positioned at the center of the paper's width. Refer to 2-13. The holes on the sides of the paper may not be aligned with each other. Reposition the paper on the tractor pins. Refer to 2-11. The sprocket units are incorrectly positioned for the paper width. Move the right sprocket unit to remove any slack across the width of the paper. Refer to 2-12. The sprocket lock levers may be unlocked, or the sprocket covers may be open. Position the sprocket units to match the width of your paper. Then lock them in place by pressing the sprocket lock levers away from you. Refer to 2-12. The paper thickness lever may be in the wrong position. For printing on ordinary paper, always set the lever to position 2. Refer to 2-22. Troubleshooting 7-17