Epson MovieMate 55 Quick Guide - Page 14

Solving Problems If you don't find the solution to your problem here, see the User's Guide on the Epson MovieMate CD for more troubleshooting tips. No picture appears on the screen. ■ Make sure Epson MovieMate is turned on (the light is green and not flashing). If the light is flashing green, wait for Epson MovieMate to warm up. ■ Make sure the lens cover is open. ■ The Screensaver feature turns off the picture if a still image is projected for more than 15 minutes. The picture is blurry or out of focus. ■ Adjust the focus using the focus ring. See page 11 for instructions. ■ There may be dirt on the lens. Clean the lens with lens-cleaning paper or a soft cloth. ■ Make sure the lens is not fogged by condensation. If you've just moved Epson MovieMate from a cold environment, wait approximately an hour before using it. If condensation forms, unplug Epson MovieMate and wait an hour or two before use. ■ Make sure Epson MovieMate is placed the correct distance from the screen: no closer than 2.9 feet and no farther than 48.6 feet. ■ If you're using the Keystone adjustment, be aware that it lessens image quality. You may want to decrease the projection angle to reduce the amount of keystone correction needed. Try adjusting Epson MovieMate's position relative to the screen. 14 Solving Problems