Epson MovieMate 55 Quick Guide - Page 7
The farther you place Epson MovieMate, for instructions. - remote control
View all Epson MovieMate 55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
■ Epson MovieMate should be directly in front of the screen or wall, facing straight ahead (at a 90-degree angle to the surface). ■ If the image is too low, you can raise it by extending the feet to tilt Epson MovieMate up. This causes the image to lose its rectangular shape. You can adjust the shape using the keystone buttons on Epson MovieMate or on the remote control. See page 10 for instructions. ■ The farther you place Epson MovieMate from the screen or wall, the larger the image will be. If you want an 80-inch diagonal widescreen image, place Epson MovieMate about 7.8 feet away from the wall or screen. The following diagram shows the approximate image size (measured diagonally) at various distances. Caution: Epson MovieMate should not be exposed to water, smoke, moisture, dust, direct heat or sunlight, or left outside for long periods of time. These environmental factors may cause damage to internal electronics over time. See the warranty on page 19 for additional details. Unpacking and Setting Up 7