Epson MovieMate 62 User's Guide - Page 51

■ MP3/JPEG Nav: When you insert a disc or USB device that has MP3, WMA, JPEG, or MPEG 1/2/4 files, you normally see a menu showing the file and folder names. Select Without Menu if you don't want to see the folder names (all files on the disc or USB device will be shown in a list, regardless of which folders they are located in). ■ Default: Press and press to return all settings to their factory defaults (except for the Disc Lock password and lamp hours). ■ Password: See page 47 for instructions on setting a password for locking DVDs. ■ Disc Lock: See page 47 for instructions on setting a password for locking DVDs. 5. To exit the menu, press . Adjusting Dolby Audio Settings You can adjust settings for external equipment with a DTS/Dolby Digital Decoder or DVDs recorded in Dolby Digital. 1. Press the button on the remote control. You see the Language Setup Page. 2. Press to display the Audio Setup Page. 3. Press to highlight Digital Output or Night Mode, then press to select it. You can select the following settings: ■ Digital Output: Change to Stream if you have connected a DTS/Dolby Digital Decoder to the Audio-Out port. ■ Night Mode: Turn this setting on if you are watching a Dolby Digital DVD at low volume. 4. Press or to select the setting you want to change, then press to save it. 5. To exit the menu, press . Setting Video and Other Options You can use the Visual Setup menus to adjust the signal format for external video equipment and set other options. Option Menu 1. Press on the remote control. You see the Visual Setup menu. 2. Press 3. Press to highlight Option, then press to select it. until you see the option you want to set. Doing More with Epson MovieMate 51