Epson MovieMate 62 User's Guide - Page 55
Cleaning the Case, Cleaning and Replacing the Air Filter - sale
View all Epson MovieMate 62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Cleaning the Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Wring the cloth as dry as possible, then wipe the case. Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case. Never spray cleaners directly on the projector. Cleaning and Replacing the Air Filter Clean the air filter and air intake vent when dust builds up or when you see the following message: The projector is overheating. Make sure nothing is blocking the air vents, and clean or replace the air filter. Dust clogs prevent proper ventilation, which can cause overheating and damage the projector. 1. Press the button on the control panel or the button on the remote control to turn the projector off. When you hear a short beep, disconnect the power cable. 2. Use a small vacuum cleaner designed for computers and other office equipment to clean the filter, as shown. If you cannot clean the removable filter or it is broken, you need to replace it. You can purchase a new filter (part # V13H134A26) from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Caring for Your Epson MovieMate 55