Epson NX300 Start Here - Page 2

Select your country: 1 Press or to select Country/Region, then press OK. 2 Press or to select your Region, then press OK. 3 If you change the region, confirm your selection at next screen by pressing the 1 key (for yes) on the numeric keypad. Enter the date and time: 1 Press or to select Daylight Saving Time, then press OK. 2 Press or to select Summer, if your region uses Daylight Saving Time and it's currently in effect. (DST is effective from spring to summer.) Otherwise select Winter to turn off the setting. 3 Press OK. 4 Press or to select Date/Time, then press OK. 5 Press or to select the type of date display, then press OK. 6 Use the numeric keypad to change the date, then press OK. 7 Press or to select a 12-hour or 24-hour display, then press OK. 8 Use the numeric keypad to set the time. 9 If you selected 12h, Press or to select AM or PM. 10 Press OK. When you're finished choosing your settings, press Menu to exit. 4 Install ink cartridges Note: Don't load paper before installing the ink cartridges. 1 Open the scanner. 2 Open the cartridge cover. 3 Shake the ink cartridges, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals from the cartridges.