Epson PowerLite 54c User Manual - Page 67
Replacing the Lamp
View all Epson PowerLite 54c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Replacing the Lamp The projection lamp typically lasts for about 2000 hours of use (in High brightness mode) or 3000 hours (in Low brightness mode). It is time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The warning light is flashing red at 0.5-second intervals. ■ The message Lamp Replace appears on the screen when the lamp comes on. To maintain projector brightness and image quality, replace the lamp as soon as possible. Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number V13H010L27. In Canada, please call (800) 463-7766 to locate a dealer. Follow these steps to replace the lamp: 1. Turn off the projector. 2. When the power light stops flashing and remains orange, unplug the power cord. 3. If the projector has been on, allow it to cool down for at least half an hour (or until the lamp is cool). 4. Turn the projector upside-down to access the lamp compartment. 5. Use the screwdriver included with the replacement lamp to slide the edge of the lamp cover towards the side of the projector. Then lift off the cover. 1 note You can check to see how many hours the lamp has been used. See page 55. warning Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 2 Maintaining and Transporting the Projector 67