Epson PowerLite 54c User Manual - Page 77
If you're using a PowerBook or iBook with, Macintosh OS X, The message, is displayed.
View all Epson PowerLite 54c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
■ Depending on your computer's video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. See your computer's documentation or online help for details. If you're using a PowerBook or iBook with Macintosh OS X: 1. From the Apple menu, select System Preferences, then click Display. 2. Select VGA Display or Color LCD, click Arrange or Arrangement, then put a check mark in Mirror Displays. If you're using a PowerBook or iBook with Macintosh OS 9.x: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen. 4. If the Arrange icon isn't available, click the Monitor icon. 5. Select one of the listed Simulscan resolutions. (Allow a few seconds for the projector to sync up after making the selection.) The message Not Supported is displayed. ■ Make sure your computer's resolution doesn't exceed UXGA and the frequency is supported by the projector. See page 88. If necessary, change your computer's resolution setting as described below. ■ Make sure the correct Video Signal is selected in the Image menu. See page 50. It should normally be set to Auto. Solving Problems 77