Epson PowerLite 9300i User Manual - Addendum

Epson

PowerLite

9300i Notice

If dust accumulates in the lamp filter, it can cause overheating and reduce the life of the lamp.

Epson recommends cleaning the lamp filter every three months; clean it more often if the projector

is used in a dusty environment.

Caution:

If the

temperature light comes on, the projector may be overheating. Clean the lamp filter as described

below. Also be sure to check the air filters on the bottom of the projector; see your

User’s Guide

for details.

Cleaning the Lamp Filter

Follow these steps to clean the lamp filter:

1.

Turn off the projector.

2.

When the power light stops flashing, unplug the power cord.

3.

Let the projector cool for at least half an hour (if it has been on). The lamp is extremely hot

immediately after use.

4.

If the projector is mounted on the ceiling, remove the rear cover.

5.

Loosen the lamp cover screws (you don’t need to take them

out all the way). Then remove the cover.

®

®

Release tab to

remove rear cover

Rear cover

Cover