Epson PowerLite Home Cinema 8350 User's Guide - Page 38
if flickering appears with the, the Home Cinema 8700 UB, set - 3d
View all Epson PowerLite Home Cinema 8350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
■ Progressive Signal > Progressive Converts interlaced to progressive signals. The projector uses 3D DigiScan™ HD Circuitry Processing for video-sourced images. For film-sourced images, you can select from 2-2, 2-3, or 4-4 pulldown detection, depending on your model. Leave the setting on Film/Auto for viewing movies on a player that produces interlaced output. Select Video for watching videos captured with a video camera. With the Home Cinema 8350, set to Off when viewing images with a large amount of movement. With the Home Cinema 8700 UB, set to Film if flickering appears with the Auto setting. Note: This setting can be used only when viewing composite video or S-video signals, or 480i or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67). For the Home Cinema 8700 UB, this setting cannot be changed while the 4-4 Pull-down setting is turned on (see page 39). ■ Motion Detection (Home Cinema 8350 only) Signal > Motion Detection This setting specifies how signals are converted to progressive signals. Select a lower setting for slow-moving or still images (S) or select a higher number for video images (M). Note: This setting can be used only when viewing composite video or S-Video signals, or 480i or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67). ■ Noise Reduction Signal > Advanced > Noise Reduction Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port. This setting reduces flickering of analog images. You can select from 3 levels of noise reduction. ■ Mosquito NR (Home Cinema 8700 UB only) Signal > Advanced > Mosquito NR Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port. This setting reduces grainy noise that can appear around the edges of MPEG images. You can select from 3 levels. 38 Making Detailed Adjustments