Epson PowerLite Pro G6450WU User Manual - Page 165
Power light, Temperature, Filter light Status and solution, light, High Altitude Mode
View all Epson PowerLite Pro G6450WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Power light Flashing red Red Red On Lamp light Off Temperature light Flashing orange Off Red Flashing Off red Off Off Filter light Status and solution Off Off Off Flashing green Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature is not too hot. Projector has overheated and turned off. Leave it turned off to cool down for five minutes. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. It is time to clean the air filter. 165