Epson PowerLite500c User Manual - Page 99
Creating Your Own Startup Screen, Capturing the Image
View all Epson PowerLite500c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Creating Your Own Startup Screen You can transfer any image on your computer to the projector, and then use it as the screen displayed when the projector is not receiving a signal. You can also set it to be displayed when you press the A/V Mute button on the remote, or as a startup screen. The image can be a company logo, slogan, photograph, or any other image you want to use. Capturing the Image You start by displaying the image you want to use on the projector. You can use an image from either a computer or video source such as a VCR or digital camera. Then follow these steps to capture the image and transfer it to the projector: 1. Press the Menu button. You see the main menu listing, with the Video menu highlighted. 2. Press the bottom edge of the Enter button (or tilt it down) to highlight the User's Logo menu. 3. Press Enter to select this feature. You see the message shown at the left. 4. Select Yes and press Enter. A selection box displays over the image. 5. Use the Enter button on the remote control to select the area of the image you want to use. Once you have selected the entire area, press Enter. 6. When you see the message "Do you use this image?" select Yes and press Enter. If you want to change the area selected, select No and repeat step 5. You see the message shown at the left. 7. Use the Enter button on the remote control to select a zoom rate (display size), and then press Enter. 8. When the message "Do you save this user logo?" appears, select Yes and press Enter. 56 Fine-Tuning Your Projector