Epson Stylus C80WN Product Support Bulletin(s)

Epson Stylus C80WN - Ink Jet Printer Manual

Get Epson Stylus C80WN - Ink Jet Printer PDF manuals and user guides View all Epson Stylus C80WN manuals
Add to My Manuals
Save this manual to your list of manuals

Epson Stylus C80WN manual content summary:

  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 1
    EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 4/30/2003 PSB.2003.05.005 N/A EpsonNet 802.11b Wireless Print Server OS X Procedure for Updating the Firmware Originator: DS Authorization: Total Pages: 6 This bulletin was created to inform you of the procedural steps
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 2
    TYPE: tftp then press RETURN Example: tftp 139.63.2.150, then press the RETURN key. Page 2 of 6
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 3
    At the tftp> prompt type the word binary, then press RETURN Example: tftp> binary, then press the RETURN key. Page 3 of 6
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 4
    At the tftp> prompt type put then press RETURN Example: tftp> put WLEP399.bin, then press the RETURN key. Page 4 of 6
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 5
    sent. This means the update is complete. Note: If a timeout error occurs do the following: Check your TCP/IP settings Cycle the power of the print server Run WP-Admin, click CLEAR then click START Check the TCP/IP settings in the Configuration page of the
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 6
    7. Open the configuration page and confirm the settings are correct, change if necessary. 8. Print the Configuration page. Click on the WP-Admin drop down menu at the top of the page and select TEST PAGE or PRINT. 9. Save, then Quit WP-Admin. Page 6 of 6
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 7
    Pages: 5 Epson Stylus C80WN Enabling Wireless Encryption Protection (WEP) on Stylus C80WN and Windows Me This bulletin was created to inform you of a procedure to guide you through configuring WEP on the Stylus C80WN Print Server system. Windows Millennium Edition Instructions Requirements: You
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 8
    This may take 2-3 minutes. 2) When the print server appears in the WP-Admin window, verify it is highlighted in the search window and click the CONFIGURE button. • When the IP Address: 192.168.0.8 >> 8 for the printer Subnet Mask: 255.255.255.0 Gateway IP: 192.168.0.1 >> 1 for the Access Point
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 9
    the new settings and the changes will be written to the Print Server. This may take 2-3 minutes. Wait for the utility to Apply button in the next screen that appears o Click OK to close the Wireless configuration window 2) The system will prompt you to REBOOT "Do you want to restart your computer
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 10
    value in the "WEP Data Privacy" section to the settings of the print server. • 64 Bit Encryption using a key table like this example "64 bit" or "128 bit" o Click the CREATE KEYS MANUALLY bullet o Type in 3132333435 or 31322234350000000000000000 o Click on APPLY button Printer Driver Settings:
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 11
    EPSON STYLUS C80 SERIERS PROPERTIES BOX, click Apply • Epson Stylus C80 Series box - Click GENERAL tab o Click the PRINT TEST PAGE button - Next Screen o If the test page printed, click Yes • Click OK. 2) Verify the print out 3) Close the Epson Stylus C80 Series Properties box 4) Close the PRINTERS
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 12
    Epson Stylus C80WN Enabling Wireless Encryption Protection (WEP) on the Stylus C80WN and Macintosh OS X This bulletin was created to inform you of a procedure to guide you through configuring WEP on the Stylus C80WN Print Macintosh computer and the Epson C80WN printer configured and operational in
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 13
    the "Boot Method" drop-down button, select STATIC. 7. Click the OK button to save the new settings and the changes will be written to the Print Server; this may take 2-3 minutes, and then proceed. *** Important Note *** If you forget to enter a value into the Key box and click OK to save
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 14
    previous page will show again; click the QUIT button. Text Editor: Open the text-editor, enter some test text and then send a print request to the Stylus C80WN printer. With a good WEP link, you will see a blue/white, horizontal barber-pole status bar icon indicating an update. Allow a short period
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 15
    : XX N/A Total Pages: 5 Epson Stylus Color C80WN Enabling Wireless Encryption Protection (WEP) for C80WN and Windows XP This bulletin was created to inform you of a procedure to guide you through configuring WEP on the C80WN Print Server system. Windows XP Instructions Requirements: You will
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 16
    To Begin: Power-up the Printer, Print Server, Access Point and Host Computer. On the Host Computer do the following: Note: The computer used for this example is an IBM ThinkPad A30p with a built-in ActionTec 802.11b Interface and Windows XP Professional. 1) Disable WEP if it is on. 2) Install then
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 17
    highlight INTERNET PROTOCOL (TCP/IP) o Click PROPERTIES button, which opens a new window o On TCP/IP PROPERTIES box, Click on USE THE FOLLOWING IP ADDRESS bullet of the Access Point and set the WEP encryption to match the Print Server WEP encryption settings. NOTE: If you have a Proxy Server setting
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 18
    Driver Settings: 1) Changing the Printers Port to TCP/IP Settings. 2) Open the Printer properties and change the Port to "Standard TCP/IP Port" and set the TCP/IP address to the address assigned to the Print Server follows: • Click Start • Go to Settings • Click on Printers • Highlight "Epson Stylus
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 19
    button o Click Apply o In the Epson Stylus C80 Series box, click the GENERAL tab o Click the PRINT TEST PAGE button o If the test page printed, click OK 3) Verify the print out 4) Close the Epson Stylus C80 Series Properties box 5) Close the PRINTERS box Go to the print server and push the test
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 20
    Total Pages: 5 Epson Stylus Color C80WN Enabling Wireless Encryption Protection (WEP) for C80WN and Windows 2000 This bulletin was created to inform you of a procedure to guide you through configuring WEP on the C80WN Print Server system. Windows 2000 Instructions Requirements: You will need
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 21
    To Begin: Power-up the Printer, Print Server, Access Point and Host Computer. On the Host Computer do the following: Note: The computer used for this example is an IBM ThinkPad A30p with built-in ActionTec 802.11b Interface and Windows 2000 Professional. 1) Disable WEP if it is on. 2) Install, then
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 22
    . Example - IP Address: 192.168.0.8 >> 8 for the printer Subnet Mask: 255.255.255.0 Gateway IP: 192.168.0.1 >> Server, leave the Boot Method on Auto and the Print Server will be assigned TCP/IP address settings automatically when from USE WINDOWS TO CONFIGURE WIRELESS SETTINGS • Click the CLOSE button
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 23
    section to match the settings of the print server. For Example 64 Bit Encryption using the WIRELESS icon found in the right side of the Windows Taskbar. • Click on ADVANCED CONFIGURATION. • Select the bit" or "128 bit." • Click the CREATE KEYS MANUALLY bullet. • Type in the WEP key you entered for
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 24
    -Admin. Printer Driver Settings: Open the Printer properties and change the Port to "Standard TCP/IP Port" and set the TCP/IP address to the address assigned to the Print Server: 1) Click the Windows "Start" button • Click Settings. • Click Printers. • Right Click the "Epson Stylus C80 Series" icon
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 25
    : N/A Total Pages: 5 Epson Stylus Color C80WN Enabling Wireless Encryption Protection (WEP) on C80WN and Windows 98 This bulletin was created to inform you of a procedure to guide you through configuring WEP on the C80WN Print Server system. Windows 98 Instructions Requirements: You will need
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 26
    following: 1) Disable WEP if it is on. 2) Install the Printer Driver and Epson Direct Print Utility (This will force you to reboot the computer). 3) Install, minutes. 2) When the print server appears in the WP-Admin window, verify it is highlighted in the search window and click the CONFIGURE button
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 27
    .0 Gateway IP: 192.168.0.1 >> 1 for the Access Point Note: If your Access Point is also a DHCP Server, leave the Boot Method on Auto and the Print Server will be assigned TCP/IP address settings automatically when the configuration is saved. 7) Click the OK button to save the new settings and the
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 28
    and value in the "WEP Data Privacy" section to the settings of the print server. • 64 Bit Encryption using a key table like this example - Key and select "64 bit" or "128 bit" o Click the CREATE KEYS MANUALLY bullet o Type in 3132333435 or 31322234350000000000000000 o Click on APPLY button o Click
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 29
    EPSON STYLUS C80 SERIERS PROPERTIES BOX, click Apply • Epson Stylus C80 Series box - Click GENERAL tab o Click the PRINT TEST PAGE button - Next Screen o If the test page printed, click Yes • Click OK. 2) Verify the print out 3) Close the Epson Stylus C80 Series Properties box 4) Close the PRINTERS
  • Epson Stylus C80WN | Product Support Bulletin(s) - Page 30
    EPSON PRODUCT SUPPORT BULLETIN Date: PSB #: Reference: Product(s): Subject: 03/27/2002 PSB.2002.03.003 N/A Stylus C80WN this is the case, you can use the following table to determine what WEP key to use for your wireless print server: HEX 30 31 32 33 34 35 36 37 38 39 41 42 43 44 45 46 47 ASCII
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Page
1 of 6
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
4/30/2003
Originator:
DS
PSB #:
PSB.2003.05.005
Authorization:
Reference:
N/A
Total Pages:
6
Product(s):
EpsonNet 802.11b Wireless Print Server
Subject:
OS X Procedure for Updating the Firmware
This bulletin was created to inform you of the procedural steps used to update the EpsonNet
802.11b Wireless Print Server firmware using the OS X Terminal Utility.
Procedure:
1.) Configure the Macintosh and the EpsonNet 802.11b Wireless Print Server for TCP/IP.
2.) Download/copy the “WLEP399.bin” firmware file to the Desktop.
3.) Navigate to Macintosh HD>Applications>Utilities>Terminal, and launch the Terminal
Utility program.
4.) At the Terminal program screen do the following:
Type cd desktop, press RETURN