Epson Stylus COLOR 3000 Quick Start - Page 10
Installing and Connecting to an Optional Interface Card, Turn off your computer and your printer.
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. Do one of the following: ◗ If you're using the included USB-to-parallel cable, connect the other end of the cable to one of the USB ports on your computer (Windows 98 and above, or Macintosh). ◗ If you're using a parallel cable (Windows only), connect the other end of the cable to your computer's parallel port and secure it as necessary. After you connect the printer, you're ready to install the software, as described on page 12. Caution: Before installing the card, you must unplug the printer from the power outlet to avoid damaging the printer and the card. Installing and Connecting to an Optional Interface Card To connect the printer to an optional FireWire or Ethernet card, you first need to install the card in your printer. You also need the appropriate cable. 1. Turn off your computer and your printer. 2. IMPORTANT: Unplug the printer from its electrical outlet. Not doing so will cause damage to the printer and the card. 3. Disconnect any interface cables from the printer. 4. Use a Phillips-head screwdriver to remove the two screws securing the interface cover. Then lift off the cover. 10