Epson Stylus COLOR 740 Special Edition User Manual - Page 127
Replacing an Outdated Ink Cartridge, Remove the old ink cartridge and install the new cartridge
View all Epson Stylus COLOR 740 Special Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Caution: To avoid damaging the printer, never move the print head by hand. Never turn off the printer while the P power light is flashing, unless the printer hasn't moved or made any noise for more than 5 minutes. Replacing an Outdated Ink Cartridge If an ink cartridge is more than six months old, you may need to replace it. How can you tell? You may notice that your printouts don't look as good as they used to. If print quality doesn't improve after cleaning and aligning the print head, you can replace one or both cartridges. Follow these steps to replace an ink cartridge before the B black or A color ink out light is flashing or on: 1 Prepare your new ink cartridge for installation as described in Removing and Installing Ink Cartridges. 2 Make sure the printer is turned on and not printing, then open the printer cover. 3 Press the E load/eject button and hold it down for three seconds until the print head moves to the left. The P power light begins flashing. 4 Remove the old ink cartridge and install the new cartridge as described in Removing and Installing Ink Cartridges. Don't press any control panel buttons, however. 5 Press the E load/eject button and close the printer cover. The printer moves the print head and begins charging the ink delivery system. The P power light flashes and the printer makes various sounds. Charging takes a couple minutes. When it's finished, the P power light stops flashing and stays on. Maintenance and Transportation Page 127