Epson Stylus NX510 Start Here - Page 3

Load paper - support

Get Epson Stylus NX510 - All-in-One Printer PDF manuals and user guides View all Epson Stylus NX510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

5 Press each cartridge down until it clicks. 6 Close the ink cartridge cover. Press it down until it clicks. 7 Lower the scanner. 8 Press the OK button to charge the ink. Charging takes about 3 minutes. Note: Your NX510 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the NX510 Series. Caution: Don't turn off the NX510 Series while the ink system is charging or you'll waste ink. 5 Load paper 1 Open the paper support and pull up the extensions. 2 Open the output tray, pull out the extensions, and raise the stopper. Note: If you are using legal-size paper, do not raise the stopper.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
5
Press each cartridge down until it clicks.
6
Close the ink cartridge cover. Press it down until it clicks.
7
Lower the scanner.
8
Press the
OK
button to charge the ink. Charging takes about 3 minutes.
Note:
Your NX510 Series ships with full cartridges and part of the ink from the
first cartridges is used for priming the NX510 Series.
Caution:
Don’t turn off the NX510 Series while the ink system is charging or
you’ll waste ink.
1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise the stopper.
Note:
If you are using legal-size paper, do not raise the stopper.
5
Load paper