Epson Stylus Pro 7890 Quick Reference Guide
Epson Stylus Pro 7890 Manual
 |
View all Epson Stylus Pro 7890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Stylus Pro 7890 manual content summary:
- Epson Stylus Pro 7890 | Quick Reference Guide - Page 1
Epson Stylus® Pro 7890/9890 QUICK REFERENCE GUIDE - Epson Stylus Pro 7890 | Quick Reference Guide - Page 2
Printer Parts Front Roll paper holder Front cover Ink bay Paper basket Back Interface connector for optional equipment USB interface Roll paper cover Control panel Ink bay Casters Network interface AC inlet Maintenance tank (Pro 9890 includes two tanks, one on each side of printer) 1 - Epson Stylus Pro 7890 | Quick Reference Guide - Page 3
both ends of the roll. Then push down the tension levers to secure them. 6 Move the roll paper all the way to the right. 3 Place the roll paper on top of the printer. 7 Slide the roll paper holder to align the left adapter with the on the holder. 4 If necessary, adjust the roll media - Epson Stylus Pro 7890 | Quick Reference Guide - Page 4
Loading Roll Paper (continued) 9 Slide the roll paper holder to the right to secure it in the printer. 11 If the Paper release light is not on, press the Paper release (ePlaten) button. 12 Insert the paper into the slot and pull it all the way down. 10 Pull up the lock lever to lock the paper in - Epson Stylus Pro 7890 | Quick Reference Guide - Page 5
its nozzles and runs a cleaning cycle if necessary (default setting). • ON: EVERY JOB-The printer automatically checks its nozzles and runs a cleaning cycle if necessary before each print job. This process uses a very small amount of ink (and no paper) and is useful if you are running large print - Epson Stylus Pro 7890 | Quick Reference Guide - Page 6
is finished, print the nozzle check again to confirm that the head is clean. Aligning the Print Head If your prints look grainy or blurry, or you see misregistration or "ghosting," you need to align the print head. 1 Make sure the printer is turned on. Load Epson Enhanced Matte paper. (You can - Epson Stylus Pro 7890 | Quick Reference Guide - Page 7
printer is on. 1 Press the button to release the ink cover. If necessary, select the ink bay for the cartridge you want to replace, then press OK. 2 Open the ink cover all the way. Ink gauges for 9 cartridges listed below Maintenance tank gauges (one tank for Pro 7890) Replacing Ink Cartridges - Epson Stylus Pro 7890 | Quick Reference Guide - Page 8
removing and then reinserting it. 7 Close the ink cover. 6 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cartridge into the slot. Don't force it. Replacing Printer Parts Replacing the Paper Cutter If you notice that the paper isn't cut cleanly, you may need to - Epson Stylus Pro 7890 | Quick Reference Guide - Page 9
Tank The Pro 7890 has one maintenance tank (on the right side) and the Pro 9890 has two (one on either side). You need to replace the maintenance tank (part # C12C890191) when you see MAINTENANCE TANK FULL on the LCD screen, the icon has an X, and the printer won't print. 1 If you have the Pro 9890 - Epson Stylus Pro 7890 | Quick Reference Guide - Page 10
PAGES Restores default settings TEST PRINT NOZZLE CHECK STATUS SHEET NETWORK STATUS SHEET JOB INFORMATION CUSTOM PAPER Shows clogged or deflected nozzles Printer settings, total prints, and maintenance tank capacity remaining Network settings Date and Time and Ink and paper used for the last 10 - Epson Stylus Pro 7890 | Quick Reference Guide - Page 11
paper is loaded OFF, ON From 15 to 300 ft From 4 to 50 ft Media type loaded in the printer Paper No 1 to 10 Photo, Proofing, Fine Art, Matte, Plain, Others STANDARD, NARROW, WIDE, WIDER PRINT parts and performs device alignment Displays version of the take-up reel installed (Pro 9890 only) 10 - Epson Stylus Pro 7890 | Quick Reference Guide - Page 12
Internet Go to epson.com/support to download drivers and firmware, access product documentation and troubleshooting, and get technical advice through e-mail. Support for non-Epson RIP Contact the RIP manufacturer. Epson and Epson Stylus are registered trademarks and Epson Exceed Your Vision is - Epson Stylus Pro 7890 | Quick Reference Guide - Page 13
Power light and button Pause/reset light and button Ink light Black ink change button Paper feed up button Paper release (ePlaten™) light and button Menu button Paper cut button Ink cover open button OK button Paper feed down button Left arrow or paper source button Printed in USA CPD-28260
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Epson Stylus
®
Pro 7890/9890
QUICK REFERENCE GUIDE