Epson Stylus Pro 9000 Product Information Guide - Page 1

EPSON Stylus Pro 9000 series - mounting brackets roll paper spindles roll paper cover ink cartridge compartment control panel ink cartridge compartment lower cover paper set lever paper hammock Printer Specifications Printing Printing method On-demand ink jet Nozzle 64 nozzles × 6 (black, cyan, magenta, configuration yellow, light cyan, light magenta) Resolution Maximum 1440 dpi × 720 dpi Maximum 43.76 inches on 44-inch paper printable width Print direction Bidirectional or unidirectional (user-selectable) Control code ESC/P® Raster Line spacing 1/6 inch (default), programmable in 1/360-inch increments Paper feed speed 200 ± 10 milliseconds per 1/6-inch line RAM 18MB optional interface shield plate AC inlet ink cartridge compartment ink cartridge compartment Macintosh serial interface connector parallel interface connector Engine Reliability Total print volume 18,000 B1 images, 30% coverage Print head life Two billion dots per nozzle Periodic maintenance Waste ink system requires replacement after approximately 12,000 sheets (parts and labor not covered under warranty) Cutter blade life Approximately 2000 B1 sheets (EPSON media up to 4.33 mil thick) Electrical Specification Input voltage range Rated frequency range Input frequency range Rated current Power consumption 120V Model 220−240V Model 90 to 132V 208 to 264V 50 to 60 Hz 49 to 61 Hz 1.0A 0.5A Approx. 100W (ISO/IEC 10561 Letter Pattern) 30W or less in standby mode Note: This product is also designed for IT power systems with phase to phase voltage 220 to 240 V. Check the label on the back of the printer for your printer's voltage. 8/00 EPSON Stylus Pro 9000 series - 1