Epson Stylus Pro 9000 Product Information Guide - Page 6

EPSON Stylus Pro 9000 series Options Option EPSON RS-5100 Fiery X2 Printing System: EPSON Stylus Pro 9000 EPSON Stylus Pro 9500 Automatic take-up reel system Replacement 44" take-up reel core Roll paper spindle-2 inch Roll paper spindle-3 inch High tension spindle-2 inch High tension spindle-3 inch Replacement cutter blade EpsonNet Internal Print Server (multiprotocol 10/100 Base-TX Ethernet Card) EPSON FireWire® Interface Card Printer only service plan-1 year Printer only service plan-2 years Printer and EPSON RS-5100 service plan-1 year Printer and EPSON RS-5100 service plan-2 years Product Code C850122 C850152 C815082 C815121 C811041 C811051 C811042 C811052 C815131 C823632A C823722 EPP90B1 EPP90B2 EPP90S1 EPP90S2 Control Panel display Operate Pause Reset 3 sec. Ink Out K CM Paper Out LC LM Y SelecType Roll Auto Cut Roll Cutter Off Sheet Paper Source Item + Paper Feed _ Cut /Eject Power Enter Cleaning 3 sec. Control Panel Buttons and Functions Button Power Cleaning Pause (Reset 3 Sec.) SelecType Paper Source (Item) Paper Feed L (+) Paper Feed M (-) Cut/Eject (Enter) Function Turns the printer on and off. Runs print head cleaning when pressed for 3 seconds. Stops printing temporarily. Press a second time to resume printing. Clears print data in the printer memory if pressed and held for three seconds. Returns the printer to READY status, when pressed in SelecType mode. Causes the printer to enter SelecType mode when pressed in READY status. In SelecType mode, this button can be used to select a desired menu. Selects the paper source: Roll Auto Cut, Roll Cutter Off, or Sheet. If you press this button during the ink drying process, you will need to press Enter to make your setting. In SelecType mode, this button can be used to select an item in a menu. Feeds paper in reverse. In SelecType mode, a desired parameter can be selected for the item (forward order). Feeds paper forward. In SelecType mode, a desired parameter can be selected for the item (reverse order). Ejects the cut sheet when the Sheet light is on. Feeds the roll paper before cutting it when the Roll Auto Cut light is on. Feeds the roll paper a small amount when the Roll Cutter Off light is on. Feeds the roll paper and then prints a page line below the document when the Roll Cutter Off light and Print Page Line option are on. In SelecType mode, sets the selected parameter for an item as the default value. Control Panel Lights and Messages Normal printer operation Message/Light READY/ Operate light on PRINTING/ Operate light flashing INK DRY MIN/ Pause light flashing RESET/ all lights flash briefly PRESS PAUSE BUTTON/ Pause light on WAIT/ Pause light on or flashing PAUSE/ Pause light on Explanation Printer is ready to print. Printer is receiving data. Printer is paused to let ink dry. Wait for the number of minutes shown. Printer is resetting. Press the Pause button to continue. Printer is warming up, performing maintenance, or charging ink. Printer is paused. To resume printing, press the Pause button. 6 - EPSON Stylus Pro 9000 series 8/00