Epson WorkForce 600 Start Here - Page 3
Install ink cartridges - parts
View all Epson WorkForce 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
4 Install ink cartridges Note: Don't load paper before installing the ink cartridges. 1 Lift up the scanner. 2 Open the cartridge cover. 3 Shake the ink cartridges gently 4 or 5 times, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals from the cartridges. 5 Insert the cartridges in the holder for each color. 6 Press the cartridges down until they click. 7 Close the ink cartridge cover and press it down until it clicks. 8 Close the scanner. 9 Press the OK button to charge ink. Charging takes about 2 minutes. Note: Your WorkForce 600 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the WorkForce 600 Series. Caution: Don't turn off the WorkForce 600 Series while the ink system is initializing or you'll waste ink.