Epson WorkForce DS-575W Users Guide - Page 119

7 slow mode light Light status The ! error light is flashing slowly The ! error light is on The following lights are flashing quickly: • ! error • ready • AP mode • Wi-Fi The ready light is off and the following lights are on: • ! error • automatic feeding mode • double feed detection skip • slow mode • AP mode • Wi-Fi The Wi-Fi and ! error lights are flashing slowly The Wi-Fi light is flashing slowly and ! error light is on The Wi-Fi (white) and ! error lights are flashing slowly Condition/solution A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support. The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside. A fatal error has occurred. Try the following: • Check the scanner connection to your computer to make sure it is secure. • Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support. The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again. An access point settings error (security error) has occurred. Press the stop button to clear the error, restart the devices you want to connect to the network, then reconnect to the network. A network connection error has occurred (the date and time have not been set correctly). Reset the date and time in Web Config. 119