Epson WorkForce DS-575W Users Guide - Page 53
Scanning to Network Computers from the Network Interface Unit - Windows, Disabling Wi-Fi Features
View all Epson WorkForce DS-575W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Setting Up Network Scanning Scanning to Network Computers from the Network Interface Unit - Windows You can scan to a network computer directly from the Epson Network Interface Unit (Windows). You first set up a scan job in Document Capture Pro and then select the computer you want to send the scanned file to. Note: Make sure your scan job settings are set up correctly in Document Capture Pro before scanning with the Epson Network Interface Unit. 1. Press the OK button on the Epson Network Interface Unit. 2. On the LCD screen of the Epson Network Interface Unit, select the computer you want to send the scanned file to and press the OK button. Note: If your scanner is part of a network group, make sure to set the computer to the same network group or it will not appear on the LCD screen. 3. If you set up a password in Document Capture Pro, enter the password at the prompt. 4. Select a scan job and press the OK button on the Epson Network Interface Unit. 5. Press the start button on the scanner or Epson Network Interface Unit. Your original is scanned and the file is sent to the computer you selected. Parent topic: Using the Network Interface Unit Disabling Wi-Fi Features You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection. Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and password, and any network settings selected for Epson DocumentScan. Press and hold the Wi-Fi button on the scanner for at least three seconds to disable the Wi-Fi features. When the Wi-Fi light and the AP mode light turn off, Wi-Fi is disabled. Parent topic: Wi-Fi Networking 53