Epson WorkForce Pro WF-5620 User Manual - Page 174

Send Settings - Fax Set the send options you want to use for outgoing faxes. Setting Batch Send Save Failure Data Options Off On Off On Description Sorts outgoing faxes by recipient in the product's memory, and then sends them as a batch. Saves faxes that failed to be sent in the product's memory. You can resend the faxes from the product's Status Menu. Parent topic: Selecting Advanced Fax Settings Receive Settings - Fax Set the receive options you want to use for incoming faxes. Setting Receive Mode Distinctive Ring Rings to Answer Options Manual Auto All Single Double Triple Double&Triple 1 to 9 Description Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product Automatically receives and prints faxes. If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. Select All for phones lines that do not use this service. Sets the number of rings before your product receives a fax. If Receive Mode is set to Auto and an answering machine is connected to the product, make sure this setting is set higher than the number of rings your answering machine is set to answer a call. 174