Epson WorkForce Pro WF-C529R Users Guide - Page 199
Solving Paper Problems, Paper Feeding Problems
View all Epson WorkForce Pro WF-C529R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Related topics Wi-Fi or Wired Networking Solving Paper Problems Check these sections if you have problems using paper with your product. Paper Feeding Problems Paper Jams Inside the Product Paper Ejection Problems Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it from the rear feed slot or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot. • Place the product on a flat surface and operate it in the recommended environmental conditions. • Be sure to insert the paper cassette all the way into your product. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • Do not load more than the recommended number of sheets. For plain paper, do not load paper above the arrow mark on the edge guides. • Make sure your paper meets the specifications for your product. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • Make sure the paper size and paper type settings are correct for the paper source. • If your product pauses during printing, make sure the front cover is closed. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the cassette printable side down. • Do not load binder paper with holes in the cassette. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems 199