Epson WorkForce Pro WF-C5890 Users Guide - Page 348
IEEE 802.1X Network Status, Using a Digital Certificate, Status ID, Status description, Parent topic
View all Epson WorkForce Pro WF-C5890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
IEEE 802.1X Network Status You can check the status of the IEEE 802.1X network settings by printing a status sheet from your product. The network status sheet displays the information in this table for IEEE 802.1X networks. Status ID Disable EAP Success Authenticating Config Error Client Certificate Error Timeout Error User ID Error Server ID Error Server Certificate Error CA Certificate Error EAP Failure Status description IEEE 802.1X is disabled IEEE 802.1X authentication is confirmed and the network connection is available IEEE 802.1X authentication in progress Authentication failed because the user ID was not set Authentication failed because the client certificate is out of date Authentication failed because there is no answer from the RADIUS server and/or authenticator Authentication failed because the product's user ID and/or certificate protocol is incorrect Authentication failed because the server ID on the server certificate and the server's ID do not match Authentication failed because the server certificate is out of date or the chain of the server certificate is incorrect Authentication failed because the CA certificate is incorrect, not imported, or out of date Authentication failed because the client certificate is incorrect (EAP-TLS or PEAP-TLS), or the user ID or password is incorrect (PEAP/MSCHAPv2) Parent topic: Connecting the Product to an IEEE 802.1X Network Using a Digital Certificate Follow the instructions in these sections to configure and use digital certificates using Web Config. About Digital Certification Obtaining and Importing a CA-signed Certificate 348