Epson WorkForce Pro WF-C879R Users Guide - Page 392
Product Makes Noise When It Sits for a While, Solving Copy Quality Problems
View all Epson WorkForce Pro WF-C879R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
• If the nozzle check page does not print, but the product's power is on, make sure your product software is installed correctly. • Make sure your product is level (not tilted). Parent topic: Solving Copying Problems Related concepts Print Head Maintenance Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Copy Quality Problems Check these sections if your copies have a quality problem. Copies Have Incorrect or Faint Colors Position, Size, or Margins of Copies are Incorrect Parent topic: Solving Problems Copies Have Incorrect or Faint Colors If your copies have incorrect, uneven, smeared, or faint colors, try these solutions: • Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary. • Do not press too hard on the original when you copy from the scanner glass. • Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended. Caution: Do not spray glass cleaner directly on the scanner glass. • Clean the ADF. • If the colors are smeared, try lowering the copy density setting on the LCD screen. Parent topic: Solving Copy Quality Problems Related concepts Print Head Maintenance 392