Epson WorkForce Pro WF-M5799 Users Guide for U.S. and Canada - Page 346

4. Select Enable EPSON Status Monitor 3 and click OK. 5. Click the Monitoring Preferences button. 6. Click the checkbox for the option that adds the shortcut icon to the taskbar. 7. Click OK to close the open program windows. Parent topic: Solving Problems Printing from a Computer Printing is Slow If printing becomes slow, try these solutions: • Make sure your system meets the requirements for your operating system. If you are printing a high- resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory. • If you are using Windows 7, close the Devices and Printers window before you print. • Make sure Quiet Mode is turned off. • Clear space on your hard drive or run a defragmentation utility to free up existing space. • Close any programs you are not using when you print. • If your product is connected to a USB hub, connect it directly to your computer instead. • If printing becomes slower after printing continuously for a long time, the product may have automatically slowed down to protect the print mechanism from overheating or becoming damaged. Let the product rest with the power on for 30 minutes, then try printing again. • If you are using the Windows PostScript printer software, try selecting Fast as the Print Quality setting on the Advanced tab of the printer software. For the fastest printing, select the following settings in your product software: • Make sure the paper type setting matches the type of paper you loaded. • Turn on any high speed settings in your product software. • Select a lower print quality setting. • Make sure the ink drying time has not been increased for double-sided printing. • Windows: Click the Maintenance or Utility tab, select Extended Settings or Speed and Progress, and select the following settings: • Always Spool RAW Datatype • Page Rendering Mode 346