Epson WorkForce WF-2750 User Manual - Page 194
Receiving Faxes Automatically, Receiving a Fax by Polling, Parent topic, Setup, Fax Settings
View all Epson WorkForce WF-2750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Note: If you run out of paper during fax printing, load more paper and press the button indicated on your product's LCD screen to continue. Parent topic: Receiving Faxes Receiving Faxes Automatically To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the product). To change the Receive Mode setting if necessary, select Setup > Fax Settings > Receive Settings > Receive Mode. If an answering machine is connected, make sure the product's Rings to Answer setting is set higher than the number of rings your answering machine is set to answer a call. For example, if the answering machine is set to pick up on the fourth ring, set the product to pick up on the fifth ring or later. Parent topic: Receiving Faxes Related tasks Receiving Faxes Manually Receiving Faxes Manually You can set up your product to receive faxes manually by setting the Receive Mode to Manual. This lets you check for a fax tone on the connected telephone before receiving a fax. 1. Select Setup > Fax Settings > Receive Settings > Manual. 2. When the connected telephone rings, answer the call. 3. If you hear a fax tone, select Receive on the product control panel. 4. Press the one of the Start buttons to start receiving the fax. 5. Hang up the telephone. Parent topic: Receiving Faxes Related tasks Receiving Faxes Automatically Receiving a Fax by Polling You can use polling to receive a fax from another fax machine (such as a fax information service). 1. Press the home button, if necessary. 194