Epson WorkForce WF-3530 Quick Guide - Page 18

Entering Your Phone Number 1. Select Your Phone Number from the Header menu. 2. Use the keypad to enter your phone number, up to 20 digits. You don't need to use dashes. Use the # button to type the + symbol for an international number. Press l to delete a character. 3. Press OK to return to the Header menu. Selecting the Number of Rings to Answer If you connected an answering machine and it is set to pick up on the fourth ring, you should set the product to pick up on the fifth ring or later: 1. Press , if necessary, then press l or r, select Setup, and press OK. 2. Press d and select Fax Settings. 3. Select Communication, then Rings to Answer. 4. Press u or d to select the number of rings, then press OK. Sending a Fax From the Control Panel You can send a fax by manually entering a fax number, as described below. Note: To dial the number using a telephone, by redialing, or by selecting from your speed dial list, see the next section. To send a fax from your computer using the Epson FAX Utility, see your online User's Guide. 1. Place your original(s) for faxing (see page 6). 2. Press , if necessary, and select Fax. To fax a two-sided document, place your document in the ADF. Press d on the Fax screen, then select Send Settings. Select 2-Sided Faxing, then select On. 3. Use the numeric keypad to enter the fax number (up to 64 digits). Then press Done. 18 Sending a Fax From the Control Panel