Eureka Eureka Brushroll Clean with SuctionSeal AS3401A Owner's Guide - Page 11
How to maintain brush roll, How to maintain turbo nozzle
View all Eureka Eureka Brushroll Clean with SuctionSeal AS3401A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
How to maintain turbo nozzle 1 Turn nozzle onto back side. Remove 1 screw. 2 Rotate lower part of cover down over brush and lift off cover. 3 Clear blockage from brush roll area. Use scissors to clip threads or hair. 4 Place cover back into position. Tighten screw. How to maintain brush roll How to use Brushroll Clean feature 1 2 • Make sure vacuum is on and brush roll is turning. Handle position can be either 10 up or down. • Press Brushroll Clean pedal for 10 seconds (Fig. 1). For stubborn debris, repeat once. CAUTION 10 Do not depress pedal longer than 10 seconds each time. 3 For obstructions larger than hair or thread, clean brush roll manually: • Turn off vacuum and unplug power cord. • Step on handle release to lower handle (Fig. 2). • Turn vacuum face down on floor. • Use scissors to clip heavy threads or strings (Fig. 3). Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com 11