Eureka Eureka Brushroll Clean with SuctionSeal AS3401A Owner's Guide - Page 12
How to replace brush roll or belt
 |
View all Eureka Eureka Brushroll Clean with SuctionSeal AS3401A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
How to replace brush roll or belt Scan for belt replacement instructions. 1 2 3 Remove 4 screws from brush roll cover. Lift off cover using rear tabs. Use a Phillips screwdriver to remove 2 screws. 4 5 6 Pull up white latch to release the belt assembly and lift straight out. Remove belt from motor shaft and brush roll. Replace belt around motor shaft. 7 8 Insert left end of brush roll first. Loop new belt around right end of brush roll and insert right end cap into base. 9 Replace the white latch assembly back into position. Reinstall 2 screws. 12 Eureka Customer Service HELPLINE 1-800-282-2886 Replace brush roll cover and 4 screws. www.eureka.com
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
 |
 |
How to replace brush roll or belt
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
12
Replace brush roll cover
and 4 screws.
Remove belt from motor
shaft and brush roll.
Replace the white latch assembly
back into position.
Reinstall 2 screws.
Insert left end of brush roll first. Loop
new belt around right end of brush roll
and insert right end cap into base.
Replace belt around
motor shaft.
6
7
8
9
5
4
Remove 4 screws from brush
roll cover. Lift off cover using
rear tabs.
Use a Phillips screwdriver to
remove 2 screws.
Pull up white latch to release the belt
assembly and lift straight out.
1
2
3
Scan for belt
replacement
instructions.