Eureka SuctionSeal PET AS1104A Owner's Guide - Page 5

How to use accessories Before using accessories • Pull out cord to desired length. Do not pull past red line (Fig.1). Push cord into cord clip. • Move brush roll lever to off position and put vacuum in an upright position (Fig. 2). • Turn air path selector knob to 'tools' (Fig. 3). • When finished vacuuming, press switch to retract cord (Fig. 4). CAUTION When using tools, always place handle in upright position and move brush roll lever to off position. ENGLISH WAND 2 WAND 2-Position wand 1 (wand 2 on some models or available for purchase) Loosen wand and hose from vacuum. • Push tool onto end of wand (Fig. 5). • Short wand: Push hose release button to remove wand 1. Attach tool to end of hose. WAND 2 • Longer wand: Slide off wand 2 and turn over, then push opposite end onto wand 1. Fig. 1 TOOLS Dusting brush Use for furniture, drapes and vents. Crevice tool Use for baseboards, corners and tight spaces. Fig. 3 Turbo nozzle (on some models or available for purchase) Use for furniture and stairs. WAND 1 Stair hose (on some models or available for purchase) ! Make sure vacuum is below you, pushed against the bottom step. • Attach stair hose to end of hose or wand. • Attach turbo nozzle to end of stair hose. NOTE: Hose length can be increased by releasing the hose from the hose retainer on back of unit. Reposition hose inside hose retainer after using accessories. Fig. 5 Eureka Customer Service HELPLINE 1-800-282-2886 WAND 1 WAND 1 WAND 2 Fig. 2 FLOORS Fig. 4 Wand 1 Wand 2 (on some models) www.eureka.com 3