Fisher and Paykel CDV3-304H-N User Guide - Page 11

Manual lighting, dial clockwise back

Get Fisher and Paykel CDV3-304H-N PDF manuals and user guides View all Fisher and Paykel CDV3-304H-N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

BURNER USE Manual lighting If there has been a power outage, the burners can be manually lit. If you have attempted to light the burner with the ignition, allow 1 minute for any accumulated gas to dissipate before manually lighting. 1 Carefully hold a battery operated lighter near the desired burner. Push the dial in and turn counterclockwise 2 to HI. Hold the dial at HI before turning to a flame setting. 3 When the burner is lit, turn the dial to any setting between HI (high) and SIM (simmer). When you have finished cooking, turn the dial clockwise back to OFF. 4 If you are using LP gas, there may be a slight extinction pop or flash at the flame spreader a few seconds after the burner has been turned off. This is normal. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
BURNER USE
Manual lighting
If there has been a power outage, the burners can be manually lit. If you have attempted
to light the burner with the ignition, allow 1 minute for any accumulated gas to dissipate
before manually lighting.
1
Carefully hold a battery operated lighter
near the desired burner.
When the burner is lit, turn the dial to any
setting between
HI
(high) and
SIM
(simmer).
When you have finished cooking, turn the
dial clockwise back to
OFF
.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
2
3
4
Push the dial in and turn counterclockwise
to
HI.
Hold the dial at
HI
before turning to a
flame setting.
11