Fisher and Paykel DD24DCTX7 BOOK USER DISHDRAWER PH7 (EN) (English) - Page 28

Cleaning the spray arm and filter plate

Get Fisher and Paykel DD24DCTX7 PDF manuals and user guides View all Fisher and Paykel DD24DCTX7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

24 User maintenance instructions - DD24/DD60 models Cleaning the spray arm and filter plate To remove and clean the spray arm and filter plate 1 Unplug the dishwasher or turn it off at the power 2 1 supply. 2 Unclip the glass supports (if fitted) from the rack 3 wires and fold all the adjustable racks away, so that they are upright and close to the top. 3 Remove the base rack carefully. Lift from the back end first to prevent knocking the detergent and rinse aid dispenser. 4 Lift the spray arm and shake any foreign material out. Rinse it clean under running water and wipe with a damp cloth. 5 Lift and remove the drain filter. 4 5 6 In the centre of the filter plate there are two rings. Turn the outer ring anticlockwise, about a 1/8 turn. This will release the filter plate. 7 Lift the filter plate out. Remove any foreign material, wash in hot soapy water and rinse thoroughly in clean water, then wipe with a damp cloth. Take care handling the sharp outer edge of the filter plate. 6 7 Turn outer ring 1/8 turn

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
24
User maintenance instructions -
DD24/DD60 models
Cleaning the spray arm and filter plate
To remove and clean the spray arm and filter plate
1
Unplug the dishwasher or turn it off at the power
supply.
2
Unclip the glass supports (if fitted) from the rack
wires and fold all the adjustable racks away, so
that they are upright and close to the top.
3
Remove the base rack carefully. Lift from the back
end first to prevent knocking the detergent and
rinse aid dispenser.
4
Lift the spray arm and shake any foreign material out.
Rinse it clean under running water and wipe with a damp cloth.
5
Lift and remove the drain filter.
6
In the centre of the filter plate there are two rings. Turn the outer ring anticlockwise, about a 1/8
turn. This will release the filter plate.
7
Lift the filter plate out. Remove any foreign material, wash in hot soapy water and rinse
thoroughly in clean water, then wipe with a damp cloth. Take care handling the sharp outer edge
of the filter plate.
1
2
4
5
6
7
3
Turn outer
ring 1/8 turn