Fisher and Paykel DD24SI7 BOOK INSTL DD24S PH7 US CA EN (English) - Page 19
Integrated Models Only - Installing The Front Panel, Adjust Panel Height To Align The Cabinetry Gaps
View all Fisher and Paykel DD24SI7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
INTEGRATED MODELS ONLY - INSTALLING THE FRONT PANEL 19 22 ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS + or - 1⁄16" (2 mm) With the front panels fitted, insert an appropriately sized Philips screwdriver into the hole above the door pin and rotate the panels up or down to align the gaps in your cabinetry. Repeat on the other side if necessary. The panel has a maximum travel of 1⁄16" (2 mm) up or down. Important! Ensure that you maintain a minimum of 1⁄16" (2 mm) ventilation gap below the panel.
19
INTEGRATED MODELS ONLY - INSTALLING THE FRONT PANEL
ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS
22
With the front panels fitted, insert an appropriately
sized Philips screwdriver into the hole above the door
pin and rotate the panels up or down to align the gaps
in your cabinetry.
Repeat on the other side if necessary.
The panel has a maximum travel of ²⁄¶·” (2 mm) up or
down.
Important!
Ensure that you maintain a minimum of 1⁄±6” (2 mm)
ventilation gap below the panel.
+ or - 1⁄±6” (2 mm)