Fisher and Paykel DD24SI7 BOOK INSTL DD24S PH7 US CA EN (English) - Page 4
Parts Supplied - All Models - fisher
View all Fisher and Paykel DD24SI7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3a PARTS SUPPLIED - ALL MODELS 4 Drain hose support (1) Drain hose joiner (1) Wire clip (1) (for securing Drain hose joiner) Side mounting bracket kit (A and B) (2) OPTIONAL Clamp (1) (for securing Drain hose joiner) Phillips 5⁄8" (16 mm) screws (7) 1½" (38 mm) bottom fixing screws & metal washers (2) Rubber washer for inlet hose (1) (comes already fitted) Moisture protection tape (1) (to prevent moisture damage) Cavity bracket kit (1) supplied with Tall height Designer and Integrated models only Edge Protector (1) (If the services hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or hoses.) If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11' 10" (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com