Fluke 1551A-12 Calibration Guide - Page 11

Stik Thermometer Safety Information If the Product overheats or is exposed to sudden physical shock, examine it for damage that can cause a safety risk. If possible, compare the displayed temperature to a known reference before Product use. If not sure, send the Product to Fluke Corporation. Refer to "How to Contact Fluke". Substitution of components will impair suitability for hazardous locations. ATEX Safety Information This manual contains data and safety regulations that must be followed for safe, reliable use of the Product in hazardous areas under the detailed conditions. If you do not follow these instructions, personal injury or Product damage can occur. Violation of applicable legislation can also occur. Read the full manual before you use the Product. To make sure of safe Product operation, fully follow all instructions and warnings in the manual. If you are not sure (due to translation and/or printing errors), refer to the English manual. An "Ex-hazardous area," as used in this manual, refers to an area made hazardous by the possible presence of flammable or explosive vapors. These areas are also referred to as "hazardous locations." Ex ib IIB T4 Gb (-10 °C ≤ Ta ≤ +50 °C) ITS10ATEX27114X Ex ib IIB T4 Gb II 2 G IECEx ITS10.0049 0344 Manufactured by Martel Electronics, Inc., 3 Corporate Park Dr. Derry, NH, USA gjo006.eps Symbols International symbols used on the Product and in this manual are explained in Table 1. Table 1. Symbols Symbol J W ~ P Meaning Earth ground Symbol M Battery Meaning Risk of Danger. Important information. See Manual. X Hazardous Voltage Do not dispose of this product as unsorted municipal waste. Go to Fluke's website for recycling information. ( Conforms to ATEX requirements Conforms to relevant European Union directives. 3