Fluke 572 FE 572 Users Manual - Page 16

572 Graphic Display and DIP Settings The graphic display (3) shows the temperature as a moving bar graph. The 3 last ten measurements are shown. The minimum and maximum temperature scale of the graph is set automatically by the unit D (Auto Range Feature). Recall previous display by pushing ENTER (D). SETTINGS SETTINGS Change the settings in the unit by using the DIP switches located in the battery compartment (see BATTERIES section). Lock: Trigger locked (ON) or unlocked (OFF). °C/°F: changes between °C and °F. Buzzer:Audible alarm ON or OFF. Backlight: Backlight ON or OFF. Set Default: Activates the factory defaults. Setup: Setup HiAlarm and Emissivity adjustment activated. Laserflash: The laser flashes when the alarm values are surpassed. Laser: activated (ON), not activated (OFF). 16