Fluke 9143-A-P-156 Product Manual - Page 26
Block Temperature Indicator 10 [Patent Pending], Heat Source Temperature 1, Set-point Temperature 2
View all Fluke 9143-A-P-156 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
914X Field Metrology Wells Parts and Controls Block Temperature Indicator (10) [Patent Pending] The Block Temperature Indicator lamp allows users to know when the block temperature is safe (50°C to 60°C) to remove inserts or move the Field Metrology Well. The indicator light is lit continuously once the block has exceeded approximately 50°C (varies 50°C to 60°C). The indicator light stays lit until the block cools to less than approximately 50°C. If the instrument is disconnected from mains power, the indicator light flashes until the block temperature is less than approximately 50°C. Figure 3 Display panel and keys 3.2.2 Display The front panel display is shown in detail in Figure 4 on opposite page. Heat Source Temperature (1) The most recent block temperature measurement is shown in large digits in the box at the top of the screen. Set-point Temperature (2) The current set-point temperature is displayed just below the Process Temperature. Reference Thermometer Temperature (3) [-P models only] When installed, the most recent reference thermometer measurement is shown on the screen. 20 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664